INTERNATIONAL LABOUR OFFICE-REQUEST FOR QUOTATION FOR THE PROVISION OF FLIGHT BOOKINGS SERVICES FOR THE (NDE) FIVE-YEAR STRATEGIC PLAN

Flight Ticket

INTERNATIONAL LABOUR OFFICE-REQUEST FOR QUOTATION FOR THE PROVISION OF FLIGHT BOOKINGS SERVICES FOR THE (NDE) FIVE-YEAR STRATEGIC PLAN

ILO

RFQ FOR THE PROVISION OF FLIGHT BOOKINGS SERVICES FOR THE (NDE) FIVE-YEAR STRATEGIC PLAN LAUNCH 28TH – 30TH OCT 2026.

REQUEST FOR QUOTATION

REFERENCE:RFX_12563_ROAF

BENEFICIARY COUNTRIES OR TERRITORIES:NIGERIA

REGISTRATION LEVEL:BASIC

PUBLISHED ON:16-OCT-2026

DEADLINE ON:20-OCT-2026 09:00 (GMT 2.00)EXPIRES WITHIN 24 HOURS

Description

Dear Bidder, The INTERNATIONAL LABOUR OFFICE (hereinafter the “ILO”) is pleased to invite your company to submit an offer for this RFQ. To enable you to prepare and submit a bid, please refer to the attached Annexes in the attachment area.

FIND THE FULL NOTICE HERE:https://www.ungm.org/Public/Notice/318565

Tags

20/10/2026

REV. FR. MOSES ORSHIO ADASU UNIVERSITY
PMB 102119, MAKURDI, BENUE STATE, NIGERIA
INVITATION TO TENDER FOR THE 2025 NEEDS ASSESSMENT INTERVENTION PROJECT

1. INTRODUCTION
The Rev. Fr. Moses Orshio Adasu University, Makurdi, Benue State “(formerly Benue State University, Makurdi)” wishes to undertake the Procurement of Goods in the implementation of its YEAR 2025 NEEDS ASSESSMENT INTERVENTION PROJECTS in the University. In compliance with the Public Procurement Act 2007 and other extant government regulations, the University hereby invites interested, competent and reputable Suppliers with relevant experience and good track records of prompt delivery of similar projects to participate in the execution of the project below:

2. SCOPE OF WORKS
CATEGORY: GOODS
DESCRIPTION
i. Supply, Installation, Testing and Commissioning of Equipment at the CBT Centre
ii. Provision of Solar Power at Selected Buildings of the University

3. ELIGIBILITY/CRITERIA
Interested Firms are required to submit the following documents:
a. Evidence of Incorporation/Registration of Company with the Corporate Affairs Commission (CAC) as a Limited Liability Company, the CAC must be active;
b. Evidence of Company Tax Clearance Certificate for the last three (3) years and valid till 31st December, 2026; with minimum average annual turnover of not less than N100million.
c. Evidence of Pension Clearance Certificate valid till 31st December, 2026 (this requirement is only applicable to bidders whose number of staff is 5 and above);
d. Evidence of current Industrial Training Fund (ITF) Compliance Certificate valid till 31st December, 2026;
e. Evidence of Current Nigeria Social Insurance Trust Fund (NSITF) Compliance Certificate valid till 31st December, 2026;
f. Evidence of Registration on the National Database of Federal Contractors, Consultants and Service Providers by submission of Interim Registration Report (IRR) expiring 31st December, 2026 or valid Certificate issued by BPP;
g. Company’s Audited Account for the last three (3) years (2023, 2024, 2025); certified by Chartered Accountant/Auditor and duly acknowledged by the Federal Inland Revenue (FIRS)
h. Comprehensive Company Profile indicating Organizational Structure with the Curriculum Vitae for key staff to be deployed for the project, including Copies of their Academic, Professional qualifications such as CPN, NITDA, COREN, NERC and resumes of key Managerial and Technical Staff (with Professional Certifications) with addresses; phone numbers and e-mail Addresses;
i. Verifiable Evidence of at least three (3) similar jobs in the last five (5) years with attached copies of Letters of Award, Valuation Certificates, Certificate of Completion and photographs;
j. Tender validity period of your bid should be clearly stated in the Bid covering/forwarding letter and in any case should not be less than Ninety (90) days;
k. Evidence of financial capability: Reference letter from reputable commercial bank indicating the willingness to provide credit facility of not less N200million.
l. Letter of authorization as the representative of the Original Equipment Manufacturers (OEMs)
m. All documents for submission must be transmitted with a duly signed covering/forwarding Letter under the Company/Firms Letter Head Paper bearing amongst others, the Registration Number (RC) as issued by the Corporate Affairs Commission (CAC), the Contact Address, Telephone Numbers (preferably GSM No.), e-mail address. All documents must be paginated following the adverts. The Letterhead MUST bear the names and nationalities of the Directors of the Company at the bottom of the page duly signed by the Authorized Officer of the Firm.
n. Accrued Sworn Affidavit that:
i) The Company is not Bankrupt, in Receivership or under Liquidation or involved in any Litigation which can potentially affect the Company’s ability to effectively discharge their responsibility if engaged;
ii) The Claims made and information provided by the Company in submission are true and correct in all ramifications;
iii) No member of Staff of Rev. Fr. Moses Orshio Adasu University, Makurdi and Bureau of Public Procurement (BPP) has Pecuniary Interest in the Company;
iv) No Director of the Company (past and present) has ever been convicted of Criminal Offences relating to fraud or Financial Impropriety in any Court of Law.

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

SHELL NIGERIA EXPLORATION AND PRODUCTION COMPANY LIMITED
NNPC SHELL CO-VENTURE PARTNERS EXXONMOBIL NIGERIAN AGIP EXPLORATION
TENDER OPPORTUNITY: PROVISION OF NITROGEN PURGING AND LEAK TESTING FOR BONGA FPSO MAINTENANCE AND OPERATIONAL SERVICES
NIPEX TENDER NUMBER: SNEPCO.00000307 (1000008484) | TENDER REF: WS3117663214
NCDMB CERT. NO.: ES/NCDMB/UPD/SNEPCO-DA-101017/210726/ PROVISION OF NITROGEN PURGING AND LEAK TEST SERVICES

1.0 INTRODUCTION
Shell Nigeria Exploration and Production Company Limited (SNEPCo), operator of the Oil Mining Lease 118 (OML 118) on behalf of itself and other Co-Venturers consisting of Esso Exploration and Production Nigeria and Nigerian Agip Exploration Company Limited under a Production Sharing Contract (PSC) with Nigerian National Petroleum Company Limited (NNPC) hereby invites reputable and competent registered Nigerian companies who are duly registered with the Nigerian Upstream Petroleum Regulator Commission (NUPRC) to do business, with proven experience and expertise in the Provision Of Nitrogen Purging And Leak Testing For Bonga FPSO Maintenance And Operational Services to be included into the bid list of the above tender.
Successful bidder(s) will be responsible to ensure compliance with the requirements of the Shell HSSE & SP Control Framework on Waste as well as local & international regulations.
The proposed contract will provisionally commence in Q2 2027 and remain active for 5 years’ duration, with a 2-year extension option.

2.0 SCOPE OF WORK/SERVICE REQUIREMENTS
The work scope will include the need for the contractor to use fit-for-purpose equipment and skilled personnel to carry out Nitrogen Purging and Leak Testing on the Bonga FPSO and other SNEPCo-assigned locations. The work shall include but not be limited to the following:
* Production of Engineering Work packs and Test procedures for all purging and Leak-testing work if required:
> Breaking of flanges and opening of vessels
> Nitrogen purging during plant inspection activities for vessel cleaning.
> Nitrogen purging for vessels and pipe works that require removal and reinstatement of Relief Valves
> Nitrogen purging and leak testing for pipeline pigging.
> Nitrogen purging and leak testing for methanol bunkering activities.
> Nitrogen purging and Leak Testing after system reinstatement.
> Nitrogen charging of crane and air tank accumulator.
> Nitrogen purging and leak testing of COT (Crude Oil Tanks) during and after inspections.
* Provision of Nitrogen/Helium reinstatement leak test on all new and disturbed flanges, clamp type connectors, threaded joints, valve bonnets, glands, and vessel man-way doors, associated pipework.
* Provision of Nitrogen/Helium reinstatement on all instrument tubing associated with the pipe works under test shall be open to the pipework and, where necessary, is tested as well.
* Mobilisation of competent personnel upon request of the BONGA operations team.
* Nitrogen Purging and topup services including all associated equipment before pressure testing.
* Provision of Nitrogen Quads on a call-off basis
* Provision of Nitrogen/Helium reinstatement test on all BONGA FPSO Any other additional process vessel & associated Pipework on the Company’s request, including process facilities, flowlines and associated Pipework located within the BONGA FPSO.
* Service to include the provision of associated Nitrogen Equipment on call out basis upon demand by the Operations Team Engineering and Maintenance.

3.0 MANDATORY REQUIREMENTS
To be eligible for this tender exercise, interested contractors are required to be pre-qualified as essential service vendors in Product Category List: 3.07.02: Pipeline Flushing, External / Internal Inspection and Pigging Services and 3.07.04- Pressure Testing Services:
i. Only successfully pre-qualified suppliers in these categories will receive Invitation to Technical and Commercial Tender (ITT).
ii. To determine if you are pre-qualified and view the product/service category you are listed for: visit https://vms.nipex.org/login and access NJQS with your log in details. Click on ‘Subscription’ tab on the left-hand side of the dashboard to view your status and, click “Product Code” tab to view registered product codes.
iii. If your company is not listed in a product/service category but registered with NUPRC to do business, contact NipeX office at Post Square Towers, 1, 3 Ologun Agbaje Street Off Adeola Odeku Street, Victoria Island, Lagos, Nigeria with your Company’s NUPRC certificate as evidence for necessary update.
iv. To initiate the NJQS prequalification process, access [http://www.nipexng.com./] www.nipexng.com, click on the Registration tab, and select NipeX SAP Ariba Vendor Registration.. To be eligible, all tenders must comply with the Nigerian Content Requirements in the NipeX system.

NNPC NIGERIAN AGIP EXPLORATION
NIGERIAN AGIP EXPLORATION (OPERATOR)
NIGERIAN NATIONAL PETROLEUM COMPANY LIMITED
SHELL NIGERIA EXPLORATION AND PRODUCTION COMPANY LIMITED
(CO-VENTURE PARTNERS)
TENDER OPPORTUNITY
PROVISION OF LARGE TUBULAR (EQUIPMENT AND SERVICES) FOR THE OFF-SHORE NIGERIA ZABAZABA & ETAN DEVELOPMENT ACTIVITIES
NIPEX REF.NO.: 1000008482

1. INTRODUCTION
Nigerian Agip Exploration Limited (hereinafter referred to as “NAE”), hereby invites reputable Operators to apply to be considered for inclusion in the bid list for the proposed contract for provision of large tubulars (36″ x 2″ X56 Conductor Pipes, 20″ 129.29 ppf X56 Surface Casings, plus other Equipment and Services) through the NipeX portal.
The proposed contract term shall be fixed for a period of Three (3) years, with Two (2) successive options to extend for an additional two (2) years for each option. One (1) single contract will be awarded at the end of the tender exercise to the lowest technically accepted responsive applicant.

2. SCOPE OF WORK
The scope under this tender, requests the Contractor to supply Large-Size Tubulars in accordance with the STAP-138-S and Project Specifications including consumables and spares parts, vehicles, qualified personnel, technical assistance and documentation necessary to carry out the scope.
The services shall include, but are not limited to, the following:
• Personnel (including operators, welders etc.);
• Supply of Equipment, (Connections, Connectors and welding including Conductor pipes, Surface Casing, Drive Shoe, Float Shoe, etc.);
• Handling Equipment
• Marking;
• Inspection;
• Documentation.

In addition to the applicable general requirements listed in “STAP-138-S Large Tubular (36″ x 2″ X56 Conductor Pipe and 20″ 129.29 ppf X56 Surface Casing both with maximum length of 12.95m for each joint installed protector included)”, Contractor shall also prepare and submit the necessary detailed technical studies/reports and other documentation as directed by Company.

Specifically, Contractor shall:
• Manufacture, test and deliver tubulars and accessories according to Company instruction.
• Supply Company on the initial delivery date, the required quantities of Large Tubulars and spare parts according to the scheduled delivery plan.
• Ensure that technical data sheets, including safe handling recommendations, are available for all products delivered.
• Deliver additional spare parts to the best of its ability in the event Company requires emergency delivery of such items.

Further details to be found in the Technical Specification attached to the ITT. The ITT is expected to be launched by fourth quarter of 2026 and contract issued by Second quarter of 2027.

3. MANDATORY REQUIREMENTS
a. To be eligible for this tender exercise, interested Contractors are required to be pre-qualified with live status by advert closing date in the 1.01.04-Casing, Tubing Liner, Connectors and Accessories (OCTG) or 2.01.01 – Pipes and Tubes- All Categories except the uncategorized, in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this category will receive Invitation to Technical Tender (ITT).
b. To determine if you are pre-qualified and to view the product/service category you are listed for: visit https://vms.nipex.org/login and access NJQS using your log in details. Click on the ‘Subscription’ tab on the left-hand side of the dashboard to view your status and click on the ‘Product Code’ tab to view your registered product codes.
c. If you are not listed in a product/service category and you are certified by Nigerian Upstream Petroleum Regulatory Commission (NUPRC) to do business in this category, contact NipeX office at Post Square building, 1-3 (Building B) Ologun Agbaje Street, off Adeola Odekulu Street Victoria Island, Lagos customersupport@nipex.com.ng, 08032850312, 0903845285 with your NUPRC certificate as evidence for verification and necessary update.
d. To initiate the NJQS pre-qualification process, access http://www.nipex-ng.com, click on the ‘Registration’ tab, and select ‘Start NipeX New Vendor Registration Here’.
e. To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system.

FEDERAL UNIVERSITY OF TECHNOLOGY
P.M.B. 1526, OWERRI
INVITATION TO TENDER FOR YEAR 2025 NEEDS ASSESSMENT PROJECTS

1. INTRODUCTION
The Federal University of Technology, Owerri in compliance with the requirements of the Public Procurement Act (PPA) 2007 invites selected, qualified and competent Contractors with proven experience and good track record of performance to submit bids for its Year 2025 NEEDS ASSESSMENT Projects as listed below:

2. ELIGIBILITY REQUIREMENTS
To be eligible, potential bidders should submit all the under listed verifiable documents and must be arranged in the following order and numbered.
a. Evidence of Certificate of Incorporation issued by the Corporate Affairs Commission (CAC) including Form CAC1.1 or CAC2 and CAC7;
b. Evidence of Company’s Income Tax Clearance Certificate for the last three (3) years valid till 31st December, 2026 with minimum average annual turnover of N850m;
c. Evidence of Pension Clearance Certificate valid till 31st December, 2026 (this requirement is only applicable to bidders whose number of staff is 15 and above);
d. Evidence of Industrial Training Fund (ITF) Compliance Certificate valid till 31st December, 2026 (this requirement is only applicable to bidders whose number of staff is 5 and above or the bidder’s annual turnover is N50m and above);
e. Evidence of Nigeria Social Insurance Trust Fund (NSITF) Clearance Certificate valid till 31st December, 2026;
f. Evidence of Registration on the National Database of Federal Contractors, Consultants and Service Providers by submission of Interim Registration Report (IRR) expiring on 31/12/2026 or valid Certificate issued by BPP.
g. Sworn Affidavit:
– disclosing whether or not any officer of the relevant committees of the Federal University of Technology, Owerri or the Bureau of Public Procurement is a former or present Director, shareholder or has any pecuniary interest in the bidder and to confirm that all information presented in its bid are true and correct in all particulars;
– that no Director has been convicted in any Country for any criminal offence relating to fraud or financial impropriety or criminal misrepresentation or falsification of facts relating to any matter;
– that the Company is not in receivership, the subject of any form of insolvency or bankruptcy proceedings or the subject of any form of winding up petition or proceedings;
h. Company’s Audited Accounts for the last three (3) years – 2023, 2024 & 2025;
i. Reference Letter from a reputable Commercial Bank in Nigeria, indicating willingness to provide credit facility for the execution of the project when needed;
j. Company’s Profile with the Curriculum Vitae of Key Staff to be deployed for the project, including copies of their Academic/Professional qualifications such as COREN, QSRBN, ARCON, CORBON etc.;
k. Verifiable documentary evidence of at least three (3) similar jobs (in size, nature & complexity) executed in the last five (5) years including Letters of Awards, Valuation Certificates, Job Completion Certificates and Photographs of the projects;
l. Company’s Profile with the Curriculum Vitae of Key Staff to be deployed for the project, including copies of their Academic/Professional qualifications;
m. A letter of authorization from the Original Equipment Manufacturer (OEM), where applicable;
n. Evidence of registration with the Computer Professionals Association of Nigeria and National Information Technology Development Agency (NITDA) where applicable
o. For Joint Venture/Partnership, Memorandum of Understanding (MoU) should be provided (CAC, Tax Clearance Certificate, Pension Clearance Certificate, ITF Compliance Certificate, NSITF Clearance Certificate, IRR & Sworn Affidavit are compulsory for each JV partner)
p. All documents for submission must be transmitted with a Covering/Forwarding letter under the Company/Firm’s Letter Head Paper bearing amongst others, the Registration Number (RC) as issued by the Corporate Affairs Commission (CAC), Contact Address, Telephone Number (preferably GSM No.), and e-mail address. The Letterhead Paper must bear the Names and Nationalities of the Directors of the Company at the bottom of the page, duly signed by the authorised officer of the firm.
Note: Technical Bid Documents should be bound with a table of contents in order of listing above.

Administrator

admin@publicprocurement.org

No Comments

Sorry, the comment form is closed at this time.