NNPC TOTALENERGIES EP NIGERIA LIMITED
OPERATOR OF THE NNPC/TOTALENERGIES JOINT VENTURE
TENDER OPPORTUNITY PROVISION OF VARIOUS OFFSHORE SERVICES IN TEPNG JV OFFSHORE
NIPEX TENDER NUMBER: 1000008343, 1000008344 AND 1000008345

1. Introduction
TotalEnergies EP Nigeria Limited (TEPNG) operator of the NNPC/TOTALENERGIES Joint venture invites interested reputable and pre-qualified contractors with relevant experience for this tender opportunity for Offshore Drilling Support Services for the Drilling Campaign in TEPNG JV slated for 2028.

2. Scope of Work and List of Services
These Services are expected to commence during the 1st Quarter of 2028
The expected duration of the contracts is five (5) years firm plus Two (2) years optional extension.

(i) Provision of Directional Drilling & Measurement While Drilling, Logging While Drilling and Gyro Services – 1000008343
3.04.08 (Turbine Drilling/Down Hole Motor Services/ Directional Drilling Services)
3.04.07 (Measurement while drilling, logging while drilling)

The scope for Provision of Directional Drilling & Measurement While Drilling, Logging While Drilling and Gyro Services for TOTALENERGIES EP NIGERIA LIMITED (TEPNG) will include:
• Drilling engineering,
• Well planning,
• Anti-collision studies,
• Directional drilling,
• Measurement while drilling,
• Formation evaluation while drilling/logging while drilling,
• Surveying,
• Gyro services for wellbore placement – pump down gyro, gyro while drilling.
• Geo-Steering services.
• Downhole tools
• And other applicable services as may be required

(ii) Provision of Cement Pumping & Products Services – 1000008344
3.04.03 (Cementing Services, Cementing engineering)
2.07.10 (Cements and associated additives)
1.01.05 (Cementing equipment and liner hanger services)

The scope for Provision of Cement Pumping & Products Services for TOTALENERGIES EP NIGERIA LIMITED (TEPNG) includes provision of Engineering, Equipment, Consumables and Personnel covering but not limited to the below;
• Supply of cement,
• Cement products,
• Pressure testing
• Pumping services

(iii) Provision of Non-Aqueous Base Mud Supply and Water-Based Mud Supply and Services – 1000008345
• 3.01.15 (Mud Engineering Services)
• 3.04.13 (Drilling Fluids/ Mud Services)

The scope for Provision of Non-Aqueous Base Mud Supply and Services for TOTALENERGIES EP NIGERIA LIMITED (TEPNG) includes provision of Engineering, Equipment, Consumables and Personnel covering but not limited to the below;
• Non-Aqueous Based mud products
• Water-Based mud products
• Mud Engineering Services

RENAISSANCE AFRICA ENERGY COMPANY
OPERATOR OF THE NNPC/RENAISSANCE/TOTALENERGIES/AENR JOINT VENTURE
NNPC TOTALENERGIES ENI RENAISSANCE AFRICA ENERGY COMPANY LIMITED
TENDER OPPORTUNITY: PROVISION OF DREDGING SERVICES, MARINE STRUCTURES AND CONCRETE WORKS
TENDER REF: CW69940 NIPEX/TENDER NUMBER: RAEC.00000038
NCDMB CERTIFICATION OF AUTHORIZATION NUMBER: ES/NCDMB//RAEC-DA-101079/270726/ PROVISION OF DREDGING SERVICES, MARINE STRUCTURES AND CONCRETE WORKS_CW69940

1.0 INTRODUCTION
Renaissance Africa Energy Company Limited in its role as Operator of the NNPC/Renaissance/Total Energies/AGIP Joint Venture hereby announces to interested and prequalified companies an upcoming tendering opportunity for PROVISION OF DREDGING SERVICES, MARINE STRUCTURES AND CONCRETE WORKS.

Renaissance hereby invites reputable and competent Nigerian Companies and alliances with requisite experience and accreditation to apply to be considered for inclusion in the bidders list for subject tender.

Successful bidder(s) will be responsible to ensure compliance with the requirements of the Renaissance HSSE & SP Control Framework on Waste as well as local & international regulations.

The proposed contract will provisionally commence in Q2 2027 and remain active for 5 years duration, with a 2-year extension option

2.0 SCOPE OF WORK

Package 1 – Provision of Major Dredging services – Capital Dredging
These contracts will be for execution of capital and maintenance dredging of new or expansion of existing drilling locations/slots, including creating/maintenance of rig access channels, sand filling, stock piling & reclamation works. The greater portion of the dredging spend is within the capital dredging category and marked by highly technical, financial and equipment demand requirements.

Workscope breakdown for this package largely include:
* Mobilization/demobilization of cutter suction dredging spread
* Mobilization/demobilization of grab dredging spread
* Pre/Post Dredge surveys
* Flowlines Probing
* Bush clearing
* Bundwall/Runoff drain construction
* Grab/bucket & Cutter Suction Dredging
* Sand Search/Soil Investigations
* Hydraulic Sandfilling and/or Stockpiling, Sand haulage
* Destumping/Installing of settlement beacons

NNPC NIGERIAN AGIP EXPLORATION
NIGERIAN AGIP EXPLORATION (OPERATOR)
NIGERIAN NATIONAL PETROLEUM COMPANY LIMITED
SHELL NIGERIA EXPLORATION AND PRODUCTION COMPANY LIMITED
CO-VENTURE PARTNERS
TENDER OPPORTUNITY
PROVISION OF SUBSEA WELLHEADS (EQUIPMENT AND SERVICES) FOR THE OFFSHORE
NIGERIA ZABAZABA & ETAN DEVELOPMENT ACTIVITIES
NIPEX REF.NO. 1000008514

1. INTRODUCTION

Nigerian Agip Exploration Limited (hereinafter referred to as “NAE”), hereby invites reputable Operators to apply to be considered for inclusion in the bid list for the proposed contract for provision of 36″ – 18.3/4″ 103.5 MPa / 15,000 psi rated working pressure subsea wellheads (equipment and services) through the NipeX portal.

The proposed contract term shall be fixed for a period of three (3) years, with two (2) successive options to extend for an additional two (2) years for each option. One (1) single contract will be awarded at the end of the tender exercise to the lowest technically accepted responsive applicant.

2. SCOPE OF WORK

The scope under this tender request will be to manufacture, test and deliver high pressure subsea wellhead systems and to provide all required spare parts, consumables, running tools, capping materials, etc. and related engineering services for installation of these wellhead systems for Zabazaba deep water drilling campaign in compliance with the specification STAP-146-S ‘Subsea Wellhead System 36″ – 18.3/4″ 103.5 MPa / 15,000 psi Rated Working Pressure. The scope shall also include the provision, on a rental basis, where applicable, of the complete running and testing tool package, including contingency equipment, backup units, spare parts, remedial tools and emergency intervention tools required to support the entire drilling campaign. In addition, the Contractor shall demonstrate adequate local operational support capability in Nigeria, including availability of qualified personnel, warehousing and spare parts management, and maintenance and servicing capacity for running and testing tools to ensure efficient and continuous operations throughout the campaign.

Main SSWH System Equipment Service Conditions (per STAP-146-S) are as follows:
– Rated Working Pressure: 103.5 MPa (15,000 psi).
– Temperature Rating: Class V [2°C (35°F) to 121°C (250°F)]
– Material Class: DD-NL (Sour Service).
– Product Specification Level: PSL 3.

Specifically, Contractor shall:
– Manufacture, test and deliver no. 19 subsea wellhead systems (consisting in 16 firm wells + 2 relief wells + 1 contingency well) rated 15,000 psi minimum working pressure of a firm basis, plus other 6 on optional basis.
– Manufacture, test and deliver subsea wellhead system accessories (seal assembly, etc.).
– Supply Company on the initial delivery date, the required quantities of Wellhead Systems and spares parts according to the scheduled delivery plan.
– Ensure that technical data sheets, including safe handling recommendations, are available for all products delivered.
– Deliver additional spare parts to the best of its ability in the event Company requires emergency delivery of such items.

Further details to be found in the Technical Specification attached to the ITT. The ITT is expected to be launched by Third quarter of 2026 and contract issued by Second quarter of 2027.

3. MANDATORY REQUIREMENTS

a) To be eligible for this tender exercise, interested Contractors are required to be pre-qualified with live status by the advert closing date in the 1.01.07 – Wellhead Equipment, Xmas Trees and Accessories (Categories A to D) in NipeX Joint Qualification System (NIQS) database. All successfully pre-qualified suppliers in this category will receive Invitation to Technical Tender (ITT).
b) To determine if you are pre-qualified and to view the product/service category you are listed for, visit https://www.nipex.org/login and access NIQS with your log in details. Click on the ‘Subscription’ tab on the left-hand side of the dashboard to view your status and click on the ‘Product Code’ tab to view your registered product codes.
c) If you are not listed in a product/service category and you are certified by Nigerian Upstream Petroleum Regulatory Commission (NUPRC) to do business in this category, contact NipeX office at Post Square building, 1-3 (Building B) Olugun Agbaje Street, off Adeola Odeku Street Victoria Island, Lagos customersupport@nipex.com.ng, 08032250332, 0903845285 with your NUPRC certificate as evidence for verification and necessary update.
d) To initiate the NIQS pre-qualification process, access http://www.nipex-ng.com, click on the ‘Registration’ tab, and select ‘Start NipeX New Vendor Registration Here’
e) To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system.

4. TENDER MINIMUM REQUIREMENT

a) Compliance with Technical Specification No. STAP-146-S and project specification.
b) Delivery to Port Harcourt / Onne Base (to be confirmed by Company) no later than 12 months from call off.
c) At least 5 years of experience in deepwater.
d) Operation manager located in Nigeria.
e) Compliance with HSE Minimum Requirements.

5. NIGERIAN CONTENT REQUIREMENT

Contractor must ensure full compliance with Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) April 2010. Please note the following:
Bidders that do not meet the Nigerian Content criterion will not be allowed to participate in next Tender Stage.
Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).
Bidders are invited to express complete understanding and willingness to comply with the Nigerian Oil and Gas Industry Content Development (NOGICD) Act 2010.

Pursuant to the above, bidders’ submissions shall be evaluated strictly with the minimum evaluation criteria defined in the NOGICD Act provisions/Schedule. Only bidders whose submissions are in compliance shall proceed to the next stage of the tendering process.

NLNG
INVITATION FOR EXPRESSION OF INTEREST FOR JETTY DEPTH RECOVERY SERVICES AT THE CORPORATE HEAD OFFICE

1.0 INTRODUCTION

NLNG is a leading energy company committed to driving innovation and meeting the evolving energy needs of the future through its world-class production Plant on Bonny Island, Rivers State, Nigeria. The Plant comprises six (6) natural gas liquefaction trains, with a combined annual capacity of twenty-two (22) million tons of Liquefied Natural Gas (LNG) and five (5) million tons of Natural Gas Liquids (NGL). Operations at the Plant are sustained by a dedicated team of operators, technical specialists and service providers who ensure reliable and continuous production. These core activities are complemented by a range of supporting functions across NLNG’s operational locations, all working together to maintain optimal performance and efficiency.

NLNG continuously transports its employees, contractors, materials and equipment via the Port Harcourt-Bonny waterways. But due to predominantly strong tidal streams, frequent sand collection and land reclamation activities around the Amadi Creek area, the depth is continuously reducing, thus affecting vessel draft. Therefore, there is a need for biannual bathymetric survey and regular dredging to ensure the depth of water at the NLNG CHO Jetty waterfront and approach are continuously adequate for boat operation.

NLNG hereby invites interested companies with the requisite experience detailed below to express their interest in participating in the tendering for this service.

2.0 SCOPE OF WORK

The scope of work shall include the following (but not limited to): 1. Provision of required expertise, dredging equipment/accessories, and the applicable regulatory permits 2. Acquisition of an approved dumpsite for disposal of dredged spoil 3. Conduction and provision of pre- and post-Bathymetric survey/reports and 4. Dredging and evacuation of Spoil.

3.0 MANDATORY REQUIREMENTS

a. Certificate of Incorporation.
b. Certified True Copy of Form CAC 7 (Particulars of Directors) and/or the most recent complete Status Report issued by the CAC (or its equivalent).
c. Certified True Copy of Form CAC 2 (statement of Share Capital and Return on Allotment of Shares) and/or the most recent complete Status Report issued by the CAC (or its equivalent). Please note that where a shareholder is a corporate entity, submission of the entity’s most recent status report disclosing the full ownership structure up to and including the ultimate beneficial owner(s) is mandatory.
d. Copy of Memorandum and Articles of Association
e. Tax Clearance Certificate for previous consecutive three (3) years with the most recent year not earlier than 2024.
f. Three (3) years financial accounts audited by a licensed accountancy firm which shall be a member of a recognised institute of accountancy. The most recent audited financial statements must have a financial year-end date of not more than eighteen (18) months prior to the date of submission of the Expression of Interest (EOI).
g. Possession of all relevant regulatory permits the annual survey and operations permit from the National Inland waterways Authority (NIWA) and licenses required to undertake dredging operations in Nigeria
h. A detailed record of relevant experience over the last five (5) years demonstrating capability to deliver the required services. This should be supported with verifiable evidence such as contracts, award letters, purchase orders and work completion certificates. Submissions must clearly indicate the client’s name and contact details, project location, and the value or volume of services executed.
i. Current/Valid Midstream and Downstream Oil and Gas Industry Service Permit (MDOGISP) issued by Nigerian Midstream and Downstream Petroleum Regulatory Authority (NMDPRA) for Dredging and Hydraulic Water Channel Maintenance (Specialized Category).
j. Vendor’s Health Safety & Environment Policy and/or Quality Management Policy
k. Quality Assurance/Quality Control (QA/QC) Policy Statement and/or Management System.
l. Company Profile, organisation size, and structure, including any parent, technical partnership, alliance, or joint venture of companies to whom they belong, together with:
i. CV of the vendor’s management team.
ii. CV of key technical personnel within the organisation available for the work
m. Detailed list of owned/leased equipment, boats, dredgers, machinery including evidence of certifications proposed for the services.
n. Letter of reference/support from bank or financial institution.
o. Industrial relations policy/plan and Community Relations plan/policy
p. Evidence and documentation supporting compliance with the Nigerian Oil and Gas Industry Content Development (NOGICD) Act 2010 [See Nigerian Content Compliance section below]

4.0 NIGERIAN CONTENT REQUIREMENTS

NLNG
INVITATION FOR EXPRESSION OF INTEREST FOR PROVISION OF REMOTELY PILOTED AIRCRAFT SURVEILLANCE AND INSPECTION SYSTEMS

1.0 INTRODUCTION

NLNG is a leading energy company committed to driving innovation and meeting the evolving energy needs of the future through its world-class production plant on Bonny Island, Rivers State, Nigeria. The plant consists of six (6) natural gas liquefaction trains with a total capacity of twenty-two (22) million tons of Liquefied Natural Gas (LNG) and five (5) million tons of Natural Gas Liquids (NGL) per annum. The production plant is operated by a dedicated team of operators, specialists and service providers who ensure continuous production round the clock, supported by enabling activities at all company locations.

NLNG requires a vendor to provide Uncrewed Aircraft Systems (UAS) services to support its surveillance and inspection needs within company facilities in Bonny Island, Port Harcourt and land acquisition in Rivers State, Nigeria. NLNG hereby invites Remotely Piloted Aircraft Surveillance and Inspection Systems (RPAS) operators with experience, capacity and all regulatory permits and licences required for the provision of UAS services, to express their interest to participate in tendering for this service.

2.0 SCOPE OF WORK

The UAS service dedicated to NLNG operations is expected to provide specialised services including but not limited to:
* Pipelines Right- of-Way (RoW) Surveillance along five (5) pipeline routes (12 km, 30 km, 33 km, 42 km and 87 km in length) 5 days a week, within 90 km radius of Rumuji and Night flights on request.
* Maritime security surveillance from shore to pilot boarding station (up to 50 nautical miles).
* Inspection of Critical Plant Infrastructure viz internal maintenance inspection of tanks, flare derricks & components, chimneys, confined spaces, pipe racks, jetty trestle and under-deck inspections, building roofs, catwalks etc.
* Telecoms mast inspection and tall structure modelling.
* Underwater pipeline and structural survey.
* Aerial monitoring, data capture and analysis of remote locations, personnel and gas leaks, using multispectral and hyperspectral image sensors, environmental control and management
* Topographic mapping with spot elevation and orthophoto for asset map updates, digitisation of geospatial data, geometric survey and volumetric quantification with geo tagging and onsite coordinate alignment.
* Real time incident monitoring for search and rescue.

3.0 MANDATORY REQUIREMENTS

Only companies considered to meet NLNG’s pre-qualification requirements shall receive further correspondence from the Company, including receipt of invitations to tender for the services. To qualify for consideration, interested companies are required to respond to this Expression of Interest (EOI) with the following information/documents for consideration. Failure to submit any of the under-listed documents may lead to disqualification. In addition, no entity (including its subsidiaries or affiliates) may submit more than one proposal, whether acting as a sole bidder, a lead partner, or a member of a Joint Venture. Participation in multiple bids may result in the disqualification of all proposals involving that entity.

a. Company’s Certificate of Incorporation.
b. Complete copy of Form CAC 7 (Particulars of Directors) and/or the most recent complete Status Report issued by the CAC (or its equivalent).
c. Complete copy of Form CAC 2 (statement of Share Capital and Return of Allotment of Shares) and/or the most recent complete Status Report issued by the CAC (or its equivalent). Please note that where a shareholder is a corporate entity, the entity’s most recent complete status report, down to the level identifying all ultimate beneficial owner(s) shall be mandatorily required.
d. Complete copy of Memorandum and Articles of Association
e. Tax Clearance Certificate for previous three (3) years (2023, 2024, 2025).
f. Three (3) years financial accounts audited by a licensed accountancy firm which shall be a member of a recognised institute of accountancy. Most recent accounts should not have an end of year date more than 18 months before the time of EOI.
g. UAS Operator’s Certificate (ROC)
h. UAS End User Certificates
i. Description and specification of UAS/Drones currently owned and operated and/or to be deployed for the service.
j. Letter acknowledging willingness to undergo NLNG and Third-Party audits.
k. Current/valid relevant Midstream and Downstream Oil and Gas Industry Service Permit (MDOGISP) issued by Nigerian Midstream and Downstream Petroleum Regulatory Authority (NMDPRA) for Facility Inspection & Maintenance Services (Specialised Category)
l. Health Safety & Environment (HSE) Management System Manual.
m. Quality Assurance/Quality policy and details of the standards to which its QA/QC processes are accredited
n. A letter of reference/support from a bank or reputable financial institution.
o. Details of relevant verifiable experience of RPAS service that contractor has undertaken as main contractor/UAS operator over the past five (5) years with evidence e.g., contracts, award letters, purchase orders, work completion certificates etc. Kindly indicate names and contact details of clients, location, and cost or volume of services provided with evidence.
p. Company Profile, organisational size and structure, including any parent, technical partnership, alliance, or joint venture of companies to whom they belong, together with:
a. CV of management team
b. CV of key technical personnel within the organisation available for the work.
q. Evidence and documentation supporting compliance with the Nigerian Oil and Gas Industry Content Development (NOGICD) Act 2010 [See Nigerian Content Compliance section below]