NNAMDI AZIKIWE UNIVERSITY, AWKA, ANAMBRA STATE-INVITATION FOR PRE-QUALIFICATION, EXPRESSION OF INTEREST (EOI) AND TENDER FOR THE YEAR 2025 TETFUND SPECIAL HIGH IMPACT PROJECT (SHIP) AND PROCUREMENT OF OPERATIONAL VEHICLES

NNAMDI AZIKIWE UNIVERSITY
P.M.B. 5025, AWKA, ANAMBRA STATE, NIGERIA
OFFICE OF THE VICE-CHANCELLOR | DIRECTORATE OF PROCUREMENT

INVITATION FOR PRE-QUALIFICATION, EXPRESSION OF INTEREST (EOI) AND TENDER FOR THE YEAR 2025 TETFUND SPECIAL HIGH IMPACT PROJECT (SHIP) AND PROCUREMENT OF OPERATIONAL VEHICLES

1. INTRODUCTION
In absolute compliance with the statutory provisions of the Public Procurement Act (PPA) 2007, Nnamdi Azikiwe University, Awka, Anambra State, hereby issues this public procurement notice to competent, experienced, and reputable Contractors, Consultants/Service Providers, Original Equipment Manufacturers (OEMs), and Authorized Vehicle Distributors for the execution of projects under THE YEAR 2025 TETFUND SPECIAL HIGH IMPACT PROJECT (SHIP) allocation and operational vehicle procurements.

1. SCOPE OF WORKS, GOODS AND CONSULTANCY SERVICES (LOT DESCRIPTION)

CATEGORY A: WORKS & GOODS (YEAR 2025 TETFUND SHIP INTERVENTION – PRE-QUALIFICATION)
LOT 1: Proposed Construction of Medical Library Building at Okefia Nnewi Campus of Nnamdi Azikiwe University, Anambra State. Procurement Method: Pre-qualification (2 Weeks Window)
LOT 2: Proposed Construction of Library at Faculty of Medicine, Akwansiri Nnewi Campus of Nnamdi Azikiwe University, Anambra State. Procurement Method: Pre-qualification (2 Weeks Window)
LOT 3: Proposed Remodeling/Upgrading of Medical Centre/Ort Provost Office at College of Health Sciences, Okefia Nnewi Campus of Nnamdi Azikiwe University, Anambra State. Procurement Method: Pre-qualification (2 Weeks Window)
LOT 4: Proposed Remodeling/Upgrading of Department of Nursing Science at Okefia Nnewi Campus of Nnamdi Azikiwe University, Anambra State. Procurement Method: Pre-qualification (2 Weeks Window)
LOT 5: Procurement, Installation, Testing and Commissioning of Laboratory Equipment and Furniture for Dentistry, Nursing and Medicine, College of Health Sciences, Okefia Nnewi Campus of Nnamdi Azikiwe University, Anambra State. Procurement Method: Pre-qualification (2 Weeks Window)

CATEGORY B: CONSULTANCY SERVICES (EXPRESSION OF INTEREST – EOI)
LOT 6: Consultancy Services for Proposed Construction of Medical Library Building at Okefia Nnewi Campus of Nnamdi Azikiwe University, Anambra State. Procurement Method: Expression of Interest (EOI)
LOT 7: Consultancy Services for Proposed Construction of Library at Faculty of Medicine, Akwansiri Nnewi Campus of Nnamdi Azikiwe University, Anambra State. Procurement Method: Expression of Interest (EOI)
LOT 8: Consultancy Services for Proposed Remodeling/Upgrading of Medical Centre/Ort Provost Office at College of Health Sciences, Okefia Nnewi Campus of Nnamdi Azikiwe University, Anambra State. Procurement Method: Expression of Interest (EOI)
LOT 9: Consultancy Services for Proposed Remodeling/Upgrading of Department of Nursing Science at Okefia Nnewi Campus. Procurement Method: Expression of Interest (EOI)

CATEGORY C: OPERATIONAL & UTILITY VEHICLES (TWO-ENVELOPE TENDERING)
LOT 10: Supply of 1 Unit Mini-Size Operational SUV: – Seating Capacity: Min 7 passengers | Engine: 4-Cylinder (Power: Min 160 hp, Torque: Min 340 Nm) | Transmission: Automatic | Drive System: Intelligent 4WD or equivalent | Airbags: Min 6 | Upholstery: Leather | Navigation Camera & Parking Sensors | Dual Zone Climate Control | Warranty: Min 5 years. Procurement Method: Two-Envelope Method (Technical & Financial)
LOT 11: Supply of 1 Unit Premium Full-Size SUV: – Seating Capacity: Min 7 passengers | Engine: 3.5L-4.5L Twin Turbo Diesel or Petrol V6 (Power: Min 300 hp, Torque: Min 600 Nm) | Transmission: 10-Speed Automatic | Drive System: Permanent 4WD | Ground Clearance: Min 230 mm | Wheelbase: Min 2,850 mm | Airbags: Min 8 | Wheels: 20-inch Alloy with All-Terrain Radar tyres | Features: 360-degree camera, Four-Zone Automatic Climate Control, Premium Leather seats (electrically adjustable with memory) | Warranty: Min 5 years or 150,000 km. Procurement Method: Two-Envelope Method (Technical & Financial)
LOT 12: Supply of 2 Unit Electric Vehicle Car (EV): – 4-seater passenger car | Electric power steering | Front airbags | Fully air conditioned | Power windows | Integrated multimedia system | Automated/Electric rear view mirror | Remote control lock with sensor. Procurement Method: Two-Envelope Method (Technical & Financial)

2. STATUTORY ELIGIBILITY REQUIREMENTS (MANDATORY NON-SCOREABLE)
– Evidence of Certificate of Incorporation issued by the Corporate Affairs Commission (CAC) including Form CAC 1.1 or CAC 2 & CAC 7.
– Evidence of Company’s Income Tax Clearance Certificate for the last three (3) years (2023, 2024, and 2025) valid till 31st December 2026.
– Evidence of Pension Compliance Certificate valid till 31st December 2026 issued by PENCOM.
– Evidence of Industrial Training Fund (ITF) Compliance Certificate valid till 31st December 2026.
– Evidence of Nigeria Social Insurance Trust Fund (NSITF) Clearance Certificate valid till 31st December 2026.
– Evidence of Registration on National Database of Federal Contractors, Consultants and Service Providers by submission of Interim Registration Report (IRR) expiring on 31st December 2026 issued by Bureau of Public Procurement (BPP).
– Sworn Affidavit deposed before a Court of competent jurisdiction confirming that:
– The company is not in receivership, insolvent, or bankrupt.
– None of the Directors has been convicted in any country for financial fraud or misrepresentation;
– No officer of Nnamdi Azikiwe University, TETFund, or BPP is a former or present Director/Shareholder or has any pecuniary interest in the bidder;
– All information presented in the bid is true and correct in all particulars.
– Company’s Audited Accounts for the last three (3) years (2023, 2024, 2025) stamped and signed by a licensed Chartered Accountant.
– CRITICAL FINANCIAL TURNOVER REQUIREMENT FOR SHIP WORKS & GOODS (LOTS 1 – 5): Bidders for Lots 1, 2, 3, 4, and 5 MUST demonstrate an Average Annual Turnover of at least N1,000,000,000.00 (One Billion Naira) only as reflected in the Audited Financial Statements of the last three years.
– Company Profile with detailed Curriculum Vitae of key technical and managerial staff including academic and professional qualifications (e.g. COREN, QSRBN, CORBON, ARCON for Works; relevant professional bodies for Consultancy Lots 6–9).
– Verifiable documentary evidence of at least three (3) similar projects executed in the last five (5) years including Award Letters, Valuation Certificates, Completion Certificates, and Photographs.
– For Goods (Lot 5) & Vehicles (Lots 10, 11 & 12): Evidence of Manufacturer’s Authorization Certificate (MAF) or Dealership Authorization Certificate from Original Equipment Manufacturer (OEM).
– For Electric Vehicle (Lot 12): Evidence of technical partnership/support for local EV charging infrastructure, battery maintenance, and spare parts supply.

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

MSI REPRODUCTIVE CHOICES, ABUJA-REQUEST FOR EXPRESSION OF INTEREST FOR THE SUPPLY OF PROMOTIONAL MATERIALS

MSI REPRODUCTIVE CHOICES
REQUEST FOR EXPRESSION OF INTEREST (REOI)
SUBJECT: SUPPLY OF PROMOTIONAL MATERIALS – 3
DATE OF THE REOI: 24TH JULY 2026
CLOSING DATE FOR RECEIPT OF EOI: 7TH AUGUST 2026
REFERENCE: EOI/031/2026

Background
MSI Nigeria Reproductive Choices is a social enterprise established in Nigeria in 2009 and is a leading provider of family planning and a range of contraceptive options to women, girls, and families across the 36 states of Nigeria and the FCT. With a mission to ensure children by choice not chance, MSI Nigeria envisions a world where every birth is wanted. Through collaborations with government at the national, state, and community levels, MSI Nigeria offers accessible and comprehensive reproductive healthcare services using operational approaches, such as Marie Stopes Medical Centres, community outreach teams, public sector strengthening support, and a toll-free contact centre.

Description of requirements:
MSI Nigeria is inviting Expressions of Interest (EOIs) from eligible suppliers for supply of the item below:

S/N Description of Item Quantity
1 MSI Branded Giant Umbrella
Specification:
– Double layered Cover
– UV double coated
– Color: Cyan Blue
– 8 springs
– Canopies to be branded: 4 areas
– Umbrella holder to be branded as seen on artwork
– Print Technique: Flex, Screen-print and DTF
– Size of artwork: A3
See link Below https://bit.ly/4vzRuJH
500pcs
2 MSI Branded Quality 8-Spring Umbrella
– Two different Colors – White and Blue
– UV Double coated
– 8 Springs
– Areas to be branded: 4
– Print Technique: Flex, Screen-print and DTF
– Size of artwork: A4
See link Below https://bit.ly/4vzRuJH
1,400 pcs
3 MSI Branded Power Bank
Specification
– Oraimo
– 30,000 mAH
– Art work: As seen on the Mockup
– Print Technique: UV Print
See link Below https://bit.ly/4vzRuJH
700pcs
4 MSI Branded Logo Mettallic Keyholder
Specifications:
– Product: Custom Die-Cut Hard Enamel Metal Keyholder
– Material: Premium Zinc Alloy
– Finish: Mirror Polished Gold Plating
– Enamel: Premium Hard Enamel (Smooth, Glossy Finish)
– Shape: Custom die-cut following the unique outline of the logo, including the arched top. Not a standard rectangle.
– Artwork: Preserve the supplied logo exactly. No redesign or simplification. Maintain all colours, typography, proportions and hotline number (22252).
– Background: White enamel background with polished gold borders around all elements.
– Size: Approximately 55 mm (H) x proportional width
– Thickness: 2.0 mm – 3.0 mm
– Key Ring: 30 mm premium gold split ring with matching gold connector
– Back: Smooth polished gold
– Artwork Format: Vector file (PNG/PDF)
– Quality: Jewelry-grade finish with precise colour matching, clean polished edges, no scratches, bubbles, or colour bleeding. Individually packed in polybags.
See link Below https://bit.ly/4vzRuJH
7,000pcs
5 MSI Branded Apron with Messages
Specifications:
Polyester – 80%
Cotton – 20%
Colors: Blue and White
See link Below https://bit.ly/4vzRuJH
1,400pcs

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

YOLA ELECTRICITY DISTRIBUTION COMPANY PLC-INVITATION TO TENDER FOR THE EXECUTION OF PROJECTS

YEDC
YOLA ELECTRICITY DISTRIBUTION COMPANY PLC
INVITATION TO TENDER
WORLD BANK-FINANCED PROCUREMENT
COUNTRY: NIGERIA
PROJECT NAME: DISTRIBUTION SECTOR RECOVERY PROGRAM (DISREP)
CREDIT NO.: 9206-NG
DATE OF ISSUE: JULY 24, 2026

1. BACKGROUND
The Federal Republic of Nigeria (FGN) has received Five Hundred Million United States Dollars (US$500 million) financing from the World Bank under the Distribution Sector Recovery Program (DISREP), through which the Bureau of Public Enterprises (BPE) will on-lend part of the proceeds to the Distribution Companies (DisCos) as a Shareholder loan to finance certain components of their Performance Improvement Plans (PIPs) prepared by the DisCos and approved by the Nigerian Electricity Regulatory Commission (NERC).

The financing will support contracts for:
a) Rehabilitation of Medium and Low Voltage Distribution Lines.
b) Rehabilitation and Expansion of Available Transformer Capacity.
Accordingly, Yola Electricity Distribution Company Plc, a licensed Electricity Distribution Company regulated by the Nigerian Electricity Regulatory Commission (NERC), invites qualified and reputable contractors to submit bids for eligible procurements under the DISREP PforR intervention.

2. SCOPE OF WORK
– Lot 1A: Procurement of Low Voltage (LV) Cables
– Lot 1B: Procurement of High Voltage (HV) Cables
– Lot 2: Procurement of Concrete Poles

Bidders may submit bids for one or more lots. Each lot will be evaluated separately.

3. ELIGIBILITY AND QUALIFICATION REQUIREMENT
Interested firms must demonstrate capacity and experience by submitting the following:

MANDATORY REQUIREMENTS
1. Certificate of Incorporation with the Corporate Affairs Commission (CAC) (Forms CAC 1.1 or CAC 2 & 7).
2. Evidence of Company’s Income Tax Clearance Certificate for the last three (3) years, valid till 31st December 2026.
3. Evidence of current Pension Compliance Certificate valid till 31st December 2026 (This requirement is only applicable to bidders whose number of staff is 15 and above).
4. Company’s/firm’s Audited financial statements for the last three (3) years (2023, 2024, 2025).
5. Evidence of VAT registration with TIN Number.
6. Evidence of Industrial Training Fund (“ITF”) Compliance Certificate valid till 31st December 2026 (this requirement is only applicable to bidders whose number of staff is 5 and above or the bidder’s annual turnover is N50m and above);
7. Evidence of Nigeria Social Insurance Trust Fund (NSITF) by inclusion of Certificate of Compliance valid until 31st December 2026.
8. Evidence of Registration on the National Database of Federal Contractors, Consultants, and Service Providers by submission of valid Interim Registration Report (IRR) expiring 31st December 2026 or valid Certificate issued by BPP.
9. Evidence of being a duly established LOCAL CABLE manufacturing company with proven technical capacity, manufacturing capability, and extensive industry experience in the supply of electrical cables and conductors (For Lot 1A & 1B ONLY);
10. Valid membership and certification issued by the Cable Manufacturers Association of Nigeria (CAMAN) (For Lot 1A & 1B ONLY);
11. Evidence of valid Nigerian Electricity Management Services Agency (NEMSA) Electric Concrete Pole Manufacturers Certificate. (For Lot 2 ONLY)
12. Evidence of duly established concrete pole Manufacturing Plant based in YOLA, ADAMAWA STATE with proven weekly output production capacity of 250 – 300 Poles ((For Lot 2 ONLY)
13. Statement of eligibility confirming no conflict of interest and compliance with Extant Regulations or Sworn Affidavit
a. disclosing whether or not any officer of the relevant committees of the Yola Electricity Distribution Company Plc or the Bureau of Public Enterprises (BPE) is a former or present director, shareholder or has any pecuniary interest in the bidder and to confirm that all information presented in its bid are true and correct in all particulars;
b. that no Director has been convicted in any country for any criminal offence relating to fraud or financial impropriety or criminal misrepresentation or falsification of facts relating to any matter.
c. that the company/firm is not in receivership, the subject of any form of insolvency or bankruptcy proceedings, or the subject of any form of winding up petition or proceedings.
d. that the company/firm does not have an existing loan or financial liability with a bank, other financial institution, or third party that is classified as doubtful, non-performance, bad, or whose repayment portion has been outstanding for the last four (4) months.

OTHER REQUIREMENTS
1. Evidence of financial capability to execute the project by submission of Reference Letter from a reputable commercial bank in Nigeria, indicating a willingness to provide credit facility for the execution of the project when needed.
2. Verifiable evidence of at least three (3) similar contracts executed in the past five (5) years, with supporting documents (Letters of Award, Valuation Certificates, Completion Certificates, etc.).
3. Proof of annual turnover of N250m and above.
4. Company profiles with details of key personnel including copies of their Academic/Professional qualifications.
5. Company’s signed Health, Safety, and Environment (HSE) policy and equipment.
6. Evidence of accreditation/registration with relevant professional bodies (COREN, NEMSA, NERC, SON, MAN, etc.)
7. Detailed delivery schedule plan.
8. Letter of undertaking that security issues would not be a challenge to work in Yola Electricity Distribution Company Areas of Franchise.

NOTE: All documents must be submitted under a covering letter on official company letterhead, showing RC number, contact address, email, phone number, and names/nationalities of directors. The letter must be signed by an authorised officer of the company.

NOVELALLIANCE FOR DEVELOPMENT AID (NADA)-INVITATION TO TENDER FOR VARIOUS SUPPLIES29

NOVELALLIANCE FOR DEVELOPMENT AID (NADA)
NADA/TENDER/PROTECTION/BORNO/2026/001

NADA is a non-profit, non-governmental organization established in Nigeria to improve people’s living conditions through effective and efficient humanitarian efforts across communities affected by poverty, disasters, and other conflicts. NADA is committed to shaping practices and influencing policies in humanitarian and development settings to impact the lives of people and their communities positively. Tender for the procurement of items as listed below to facilitate resilience building for conflict-affected women and children

Date: 20/7/2026
Tender number: NADA/Tender/Protection/Borno/2026/001
Description: National Tender

LOT 1: Re-insertion kits

CENTRE FOR ADVOCACY, TRANSPARENCY AND ACCOUNTABILITY INITIATIVE (CATAI)-INVITATION TO TENDER FOR THE SUPPLY AND DELIVERY OF DIGNITY KITS AND HYGIENE MATERIALS FOR GBV SURVIVORS AND VULNERABLE WOMEN AND GIRLS

Ref: CATAI/FCDO-COMPASS2/2026/NOT/131                        Date: 21 July, 2026

NATIONAL OPEN TENDER DOCUMENT

Supply and Delivery of Dignity Kits and Hygiene Materials for GBV Survivors and Vulnerable Women and Girls

Bama, Banki, Gwoza, Ngala, Damasak and Madagali

Tender Reference No.CATAI/FCDO-COMPASS2/2026/NOT/131
Purchase Request Ref.2026 / FCDO / NGA-000385-06 (FCDO Year 2) / 131
ProjectFCDO COMPASS Year 2 — Project Code NGA-000385-06 (FCDO Year 2)
Tender MethodNational Open Tender
Submission Deadline3rd August, 2026 at 12:00 noon
Tender Opening5th August, 2026 at 10:00 a.m., CATAI Office, Maiduguri
Bid Validity Period60 days from the date of tender opening

Section 1 — Introduction

The CENTRE FOR ADVOCACY, TRANSPARENCY AND ACCOUNTABILITY INITIATIVE (CATAI) is a Nigerian humanitarian civil society organisation implementing the FCDO COMPASS Year 2 project in conflict-affected communities of Borno, Adamawa, Sokoto and Zamfara States.

Women and girls in Bama, Banki, Gwoza, Ngala, Damasak and Madagali continue to face heightened risk due to limited access to essential hygiene materials and dignity items. CATAI is procuring 900 dignity kits to support their hygiene, safety and well-being, and to contribute to the prevention of Gender-Based Violence (GBV) risks.

CATAI invites tenders from eligible, reputable and competent companies for the supply and delivery of the items described in Section 3 of this document, in accordance with the eligibility requirements set out in Section 4.

Section 2 — Tender Timeline

Date of Advertisement21st July, 2026
Deadline for Clarification Requests31st July, 2026 at 5:00 p.m.
Tender Submission Deadline3rd August, 2026 at 12:00 noon
Tender Opening5th August, 2026 at 10:00 a.m., CATAI Office, Maiduguri
Evaluation Completed7th August, 2026
Notification of Award / PO Issuance10th August, 2026
Delivery DeadlineWithin 30 days of Purchase Order issuance
Bid Validity Period60 days from the date of tender opening

CATAI reserves the right to revise this timeline. Any revision will be communicated in writing to all bidders.

Section 3 — Scope of Supply

The successful bidder shall supply, assemble into complete dignity kits, and deliver all items listed in the Bill of Quantities below to all six delivery locations: Bama, Banki, Gwoza, Ngala, Damasak and Madagali. Prices quoted must be Delivered Duty Paid (DDP) — fully inclusive of packaging, loading, transportation, offloading and handling to each location. CATAI will not pay any separate transportation, freight or logistics charge; bidders must factor all such costs into their unit prices.

All items must be new, of good quality, durable and fit for purpose. The bidder shall assemble all 19 items per beneficiary into one complete dignity kit bag (Item 4) before delivery. Bidders are required to submit physical samples of each item with their tender.

Bill of Quantities / Price Schedule

S/NItem DescriptionUnitTotal Qty RequiredUnit Price (₦)Total Price (₦)
1Reusable sanitary pads, pack of 6 washable pads, soft absorbent material, leak-resistant design, suitable for women and adolescent girls, supplied in hygienic packaging.Pack900
2Multipurpose laundry detergent bar soap, 250g per bar, suitable for washing clothes and general household cleaning, firm texture, effective stain removal, supplied in original packaging.Piece3,600
3Detergent powder, 1kg pack, suitable for laundry and general household cleaning, good foaming and stain-removal quality, supplied in sealed manufacturer packaging.Piece900
4Reusable dignity kit bag, medium size, durable material, strong handle/strap, secure zip or drawstring closure, suitable for carrying hygiene and personal items.Pack900
5Adult toothbrush, soft or medium bristles, durable handle, suitable for daily oral hygiene, individually wrapped or supplied in hygienic packaging.Pieces900
6Fluoride toothpaste, medium-size tube, minimum 100g or equivalent, suitable for daily oral hygiene, supplied in sealed original packaging.Piece900
7Women’s cotton underwear, assorted adult sizes, breathable fabric, comfortable elastic waistband, good stitching, supplied clean and neatly packaged.Piece4,500
8Women’s wrapper fabric, Chiganvy-type, 6 yards per piece, good-quality material, assorted colours/patterns, neatly folded and packaged.Piece900
9Khimar/Hijab, 3 yards, modest head-covering fabric, soft and breathable material, suitable for women and girls, assorted neutral colours.Piece900
10Plastic bucket with fitted cover, 20 litres capacity, durable body, tight-fitting lid, strong carrying handle, suitable for household storage and washing.Piece900
11Medium-size bath towel, absorbent material, soft texture, neatly hemmed edges, quick-drying, assorted colours, suitable for personal hygiene use.Piece900
12Sleeping mat, 6ft x 3ft, durable woven/plastic material, lightweight, rollable, easy to clean, suitable for individual sleeping use.Piece900
13Rubber slippers, assorted adult sizes, durable sole, comfortable straps, non-slip base, suitable for daily personal use.Pair900
14Hair comb, durable plastic material, adult size, smooth teeth, suitable for general grooming and daily personal use.Piece900
15Disposable shaving sticks, pack of 5, sharp stainless-steel blades with safety cover, suitable for personal grooming, supplied in sealed packaging.Pack900
16Solar rechargeable LED torchlight, built-in rechargeable battery, solar charging panel, strong light output, durable body, supplied with accessories where applicable.Pack900
17Emergency alert whistle, durable plastic or metal, loud sound output, lightweight, with lanyard/key-ring attachment where available.Piece900
18Laundry rope, 10 metres length, durable nylon/plastic material, strong enough for hanging wet clothes, weather-resistant.Piece900
19Petroleum jelly, 500ml container, suitable for skin protection and moisturising, sealed original packaging, Vaseline or equivalent quality.Piece900
SUB-TOTAL

RIVERS STATE UNIVERSAL BASIC EDUCATION BOARD (RSUBEB)-INVITATION TO TENDER FOR THE EXECUTION OF PROJECTS

GOVERNMENT OF RIVERS STATE
RIVERS STATE UNIVERSAL BASIC EDUCATION BOARD (RSUBEB)
16A ELECHI BEACH MILE ONE DIOBU, PORT-HARCOURT

INVITATION TO TENDER

Date of issue of Invitation Wednesday 22nd July, 2026

1.0 INTRODUCTION
The Rivers State Universal Basic Education Board (RSUBEB) has received funds from Rivers State government and the Universal Basic Education Commission (UBEC) for 2023, (3rd -4th Qtr.), 2024 (1st- 4th Qtr.) and 2025 (1st – 2nd Qtr.) from the FGN/UBE Intervention Fund towards the cost of Universal Basic Education (UBE) Intervention Projects in the State and intends to apply part of the Funds to cover eligible payment under the following contracts headings viz: Construction and Renovation of blocks of classrooms, construction of block wall fencing and landscaping, procurement and distribution of pupils/students desk and teachers furniture, TLMs, Social Mobilization, Quality Assurance and ICT Improvement all for ECCDE, Primary and JSS schools in the State, for which this Invitation to Tender is issued.

1.1 SCOPE OF WORK
The Rivers State Universal Basic Education Board (RSUBEB), Port Harcourt now invites Sealed Tenders from Reputable Contractors/Suppliers for the above mentioned projects as in the schedule below.

2023, (3RD – 4TH Qtr.) CIVIL WORK: PHYSICAL INFRASTRUCTURE- NEW CONSTRUCTION

CIVIL WORK: PHYSICAL INFRASTRUCTURE- CONSTRUCTION

PACKAGE 1: CONSTRUCTION OF NEW BLOCK OF CLASSROOMS WITH TOILET FACILITIES – ECCDE
1. RSUBEB/2023/3&4/ECCDE/NC/1/1: Construction of 1no Block of 3 classrooms with 3 rooms sleeping area and 3 room toilets at PRIMARY SCHOOL 1 BORI with fabrication and distribution of ECCDE play facilities & accessories. LGA: KHANA. Duration: 16 WEEKS.

PACKAGE 2: CONSTRUCTION OF NEW BLOCK OF CLASSROOMS WITH TOILET FACILITIES – PRIMARY
1. RSUBEB/2023/3&4/PRIM/NC/2/1: Construction of 1no Block of 8 Classrooms including H/M office, store and 11 room toilets at STATE PRIMARY SCH OMOWIRI-RUMUEKPE. LGA: EMOHUA. Duration: 16 WEEKS.

PACKAGE 3: CONSTRUCTION OF NEW BLOCK OF CLASSROOMS – JSS
1. RSUBEB/2023/3&4/JSS/NC/1/1: Construction of 1No. Block of 6 Classrooms including Principal’s Office, 2 V.P’s offices, General office, Staff room, a store and 9 room toilets at C.S.S (UBE) ULAKWO. LGA: ETCHE. Duration: 16 WEEKS.

CIVIL WORK: PHYSICAL INFRASTRUCTURE-RENOVATION

PACKAGE 4: RENOVATION OF BLOCKS OF CLASSROOMS WITH TOILET FACILITIES – PRIMARY
1. RSUBEB/2023/3&4/PRIM/RN/4/1: Renovation of 1no Block of 14-Classroom Model Prim. Sch. (left wing: 6 classrooms and 6 toilet) upland LGA at STATE SCHOOL ABALAMA. LGA: ONUEMA. Duration: 12 WEEKS.
2. RSUBEB/2023/3&4/PRIM/RN/4/2: Renovation of 1no Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and ECCDE, H/m Office and Store in upland LGA at STATE SCHOOL ABALAMA. LGA: ASARI-TORU. Duration: 12 WEEKS.
3. RSUBEB/2023/3&4/PRIM/RN/4/3: Renovation and Remodeling of 1no Block of 6 Classrooms including 5 rooms toilets, H/m’s Office. LGA: ONELGA.

2023, (3RD – 4TH Qtr.) PHYSICAL INFRASTRUCTURE: FABRICATION, PROCUREMENT AND DISTRIBUTION OF ECCDE, PRIMARY AND JSS FURNITURE (EXCEPT OTHERWISE DESCRIBED) ALL PUPILS DESKS & CHAIRS TO BE MAHOGANY (25mm thick), SHELVES AND TABLES TO BE HDF PLYWOOD (20mm thick) OR ITS EQUIVALENT.

PACKAGE 1: ECCDE
1. RSUBEB/2023/3&4/ECCDE/FS/1/1
Description: PROCUREMENT AND DISTRIBUTION OF ECCDE (PRE-PRIMARY) FURNITURE:
1. Formica faced shelves in 300 x 300 cubicles
2. ECCDE plastic table
3. Plastic chairs
4. Writing desk with 2 drawers
5. Wooden arm chair
6. AUDIO PLAYER
7. MAT
8. TOPS
9. TV/VCD PLAYER
10. PLAYING EQUIPMENT
11. 6-seater wooden work station (Computer Lab Table) with 6 partitioned cubicles and 6 conference chairs in one set.
Quantities: 6, 30, 90, 3, 3, 1, 3, 2, 12.
School Location & LGA: PRIMARY SCHOOL 1 BORI, KHANA LGA; OPOBO PRIMARY SCH. OPOBO, ONOLGA.
Duration: 12 WEEKS.

PACKAGE 2: PRIMARY
1. RSUBEB/2023/3&4/PRIM/FS/2/1
Description:
1. 2 – Seater pupils’ desk
2. Teachers’ table with 2 drawers
3. Teachers’ wooden Arm chair
4. Executive desk L shaped
5. Executive metal Arm chair
6. Visitors high wooden chair
7. 4 Drawer filing cabinets
8. Book shelve 1.8m x 1.2m 4 layers
Quantities: 322, 30, 30, 5, 5, 10, 5.
School Location & LGA:
1) STATE PRIMARY SCH. OMOWIRI-RUMUEKPE, EMOHUA LGA
2) COMMUNITY PRIMARY SCHOOL OGBOL, ONELGA
3) STATE SCHOOL ABALAMA, ASARI-TORU LGA
Duration: 12 WEEKS.

2024 (1ST -4TH Qtr.) CIVIL WORK: PHYSICAL INFRASTRUCTURE- NEW CONSTRUCTION

CIVIL WORK: PHYSICAL INFRASTRUCTURE- CONSTRUCTION

PACKAGE 1: CONSTRUCTION OF NEW BLOCKOF CLASSROOMS WITH TOILET FACILITIES – ECCDE
1. RSUBEB/2022/ECCDE/NC/1/1: Construction of 1no block of 3 classrooms with 3 rooms sleeping area and 1 rooms toilets at PORT HARCOURT PRIMARY SCHOOL, PORT HARCOURT with fabrication and distribution of ECCDE play facilities & accessories. LGA: PORT HARCOURT CITY. Duration: 16 WEEKS.
2. RSUBEB/2022/ECCDE/NC/2/1: Construction of 1no block of 3 classrooms with 3 rooms sleeping area and 3 rooms toilets at STATE SCHOOL OBORONOMA with fabrication and distribution of ECCDE play facilities & accessories. LGA: DEGEMA. Duration: 16 WEEKS.

PACKAGE 2: CONSTRUCTION OF NEW BLOCK OF CLASSROOMS WITH TOILET FACILITIES – PRIMARY
1. RSUBEB/2024/PRIM/NC/2/1: Construction of 1No. Block of 4 Classrooms building including 6 rooms toilet, H/m’s Office and store at STATE PRIMARY SCHOOL OKPOBO. LGA: ELEME. Duration: 16 WEEKS.
2. RSUBEB/2024/PRIM/NC/2/2: Construction of Block of One-Storey 6 Classrooms including H/M Office at SALVATION ARMY STATE SCHOOL, PORT HARCOURT. LGA: PORT HARCOURT CITY. Duration: 18 WEEKS.
3. RSUBEB/2024/PRIM/NC/2/3: Construction of 1no Block of 8 Classrooms including 9 rooms toilet, H/m’s Office and store in upland LGA at CPS IV BONJU. LGA: GOKANA. Duration: 16 WEEKS.
4. RSUBEB/2024/PRIM/NC/2/4: Construction of 1no Block of 8 Classrooms including 9 rooms toilet, H/m’s Office and store in upland LGA at COMMUNITY PRIMARY SCHOOL OKPOSI. LGA: ONELGA. Duration: 16 WEEKS.
5. RSUBEB/2024/PRIM/NC/2/5: Construction of 1no Block of 8 Classrooms including 9 rooms toilet, H/m’s Office and store in upland LGA at COMMUNITY PRIMARY SCHOOL OGOGO. LGA: AHOADA WEST. Duration: 16 WEEKS.

6 RSUBE8/2024/PRIM/NC/2/6 Construction of 1No. Block of 8 Classrooms including 9 rooms toilet, H/m’s Office and store at S S II AMURUTO TOWN ABUA/ODUAL 16 WEEKS
7 RSUBE8/2024/PRIM/NC/2/7 Construction of 1No. Block of 8 Classrooms building including 4 rooms toilet, H/m’s Office and store at UPE MODEL PRIMARY SCH ANDONIMA. ASARI-TORU 16 WEEKS

PACKAGE 3: CONSTRUCTION OF BLOCK WALL FENCING WITH EXTERNAL INTERLOCKING TILES AND GATE HOUSE – PRIMARY
1 RSUBE8/2024/PRIM/FC/3/1 Construction of Block wall Perimeter Fencing with external interlocking tiles at MPS OPOBO NEW LAYOUT OPOBO OPORO/NKORO 12 WEEKS
2 RSUBE8/2024/PRIM/FC/3/2 Construction of Block wall Perimeter Fencing with external interlocking tiles at ST. PAUL’S MPS OPOBO OPORO/NKORO 12 WEEKS

PACKAGE 4: CONSTRUCTION OF NEW CLASSROOM BLOCK WITH TOILET FACILITIES – JSS
1 RSUBE8/2024/JSS/NC/4/1 Construction of 1no Block of 6 Classrooms including 5 rooms toilet, Principal’s Office, 2 V.P’s offices, Staff room and a store at COMMUNITY JUNIOR SEC. ULUBABA KHAHA 16 WEEKS
2 RSUBE8/2024/JSS/NC/4/2 Construction of 1no Block of 8 Classrooms including 5 rooms toilet, Principal’s Office, 2 V.P’s offices, Staff room and a store at COMMUNITY JUNIOR SEC. ULUBABA ETCHE
3 RSUBE8/2024/JSS/NC/4/3 Construction of 1no Block of 6 Classrooms including Principal’s Office, 2 V.P’s offices, Staff room and a store at CSS UBE EBUKUMA ANDONI

CIVIL WORK: PHYSICAL INFRASTRUCTURE-RENOVATION
PACKAGE 5: RENOVATION OF BLOCKS OF CLASSROOMS WITH TOILET FACILITIES – PRIMARY
1 RSUBE8/2024/PRIM/RN/5/1 Renovation of Block of 18-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at STATE PRIMARY SCHOOL NKPOULU RUMUOBI OBIO/AKPOR 12 WEEKS
2 RSUBE8/2024/PRIM/RN/5/2 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at UPE UBIO AHOADA WEST 12 WEEKS
3 RSUBE8/2024/PRIM/RN/5/3 Renovation of Blocks of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at at MODEL PRIMARY SCHOOL OKPO ASARI-TORU 12 WEEKS
4 RSUBE8/2024/PRIM/RN/5/4 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store (with wing: 6 classrooms and toilets) at CPS IBULUYA/DOMBO OKRIKA 12 WEEKS
5 RSUBE8/2024/PRIM/RN/5/5 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at CENTRAL STATE PRIMARY SCHOOL NGWURUTA IKWERRE 12 WEEKS
6 RSUBE8/2024/PRIM/RN/5/6 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at STATE SCHOOL I NDELE EMOHUA 12 WEEKS
7 RSUBE8/2024/PRIM/RN/5/7 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at STATE PRIMARY SCHOOL II ABAJO ELEME 12 WEEKS
8 RSUBE8/2024/PRIM/RN/5/8 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at COMMUNITY PRIMARY SCHOOL LOCATION OYIGBO OYIGBO 12 WEEKS
9 RSUBE8/2024/PRIM/RN/5/9 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at ST. BATH STATE SCHOOL DEGEMA DEGEMA 12 WEEKS
10 RSUBE8/2024/PRIM/RN/5/10 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at ST. PATRICE MODEL PRIMARY SCHOOL OBOPO IKWERRE 12 WEEKS
11 RSUBE8/2024/PRIM/RN/5/11 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store (Roof, Ceiling and painting) at SPS AMAJI OMUMA 12 WEEKS
12 RSUBE8/2024/PRIM/RN/5/12 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at STATE SCHOOL ZUOBAMA ASARI-TORU 12 WEEKS
13 RSUBE8/2024/PRIM/RN/5/13 Renovation of Block of 14-Classroom Model Prim. Sch. including toilets, Assembly Hall, Sickbay, Library and Ecode, H/m Office and Store at STATE SCHOOL ISODU EMOHUA 12 WEEKS
14 RSUBE8/2024/PRIM/RN/5/14 Renovation of Block of 6-Classrooms including 5 rooms toilets, H/m’s Office and a store at TPS II NWEO. GOKANA 12 WEEKS
15 RSUBE8/2024/PRIM/RN/5/15 Renovation of Block of 4 Classrooms with Office and store at CPS 1 NKORO OPOBO/NKORO 12 WEEKS
16 RSUBE8/2024/PRIM/RN/5/16 Renovation and remodeling of 1No. Block of 8 Classrooms including 9 rooms toilet, H/m’s Office and store at STATE SCHOOL OZUZU ETCHE 12 WEEKS
17 RSUBE8/2024/PRIM/RN/5/17 Renovation and remodeling of 1No. Block of 8 Classrooms including 9 rooms toilet, H/m’s Office and store at CPS RUMUEME OBIO/AKPOR 12 WEEKS

PACKAGE 6: RENOVATION OF BLOCKS OF CLASSROOMS WITH TOILET FACILITIES – JSS
1 RSUBE8/2024/JSS/RN/6/1 Renovation of Block of Workshop Hall : 3 Laboratories, 1 Chemical Store, Office and 3 room toilets at CSS RUMUEME BONNY 12 WEEKS
2 RSUBE8/2024/JSS/RN/6/2 Renovation and remodeling of 1No. Block of 6-Classrooms including 9 rooms toilet, Principal’s Office, 2V.P’s offices, Staff room, non-academic staff room and a store at CSS KALABAMA OPOBO/NKORO
3 RSUBE8/2024/JSS/RN/6/3 Renovation of 1No. Block of 6-Classrooms including 5 rooms toilet, Principal’s Office, Staff room, and a store at COMMUNITY SEC. SCHOOL OBETE NODO OYIGBO
4 RSUBE8/2024/JSS/RN/6/4 Renovation and remodeling of 1No. Block of 6-Classrooms including 5 rooms toilet, Principal’s Office, 2V.P’s offices, Staff room, General office and a store at CSS KALIO-AMA OKRIKA
5 RSUBE8/2024/JSS/RN/6/5 Renovation and remodeling of 1No. Block of 6-Classrooms, office and a store at COMMUNITY JUNIOR SEC. ST BATHOLOMEW BURUKIRI BONNY
6 RSUBE8/2024/JSS/RN/6/6 Renovation and remodeling of 1No. Block of 6-Classrooms including 5 rooms toilet, Principal’s Office, 2V.P’s offices, Staff room, General office and a store at UPATA II. COMMUNITY SEC. SCH. ODABIDI AHOADA WEST 12 WEEKS
7 RSUBE8/2024/JSS/RN/6/7 Renovation and remodeling of 1No. Block of 6-Classrooms including 9 rooms toilet, Principal’s Office, 2V.P’s offices, Staff room, General office and a store at CSS BIAKU KHAHA

2024 (1st – 4th Qtr.) PHYSICAL INFRASTRUCTURE: PROCUREMENT AND DISTRIBUTION OF ECCDE, PRIMARY AND JSS FURNITURE (EXCEPT OTHERWISE DESCRIBED) ALL PUPILS DESKS & CHAIRS TO BE MAHOGANY (25mm thick), SHELVES AND TABLES TO BE HDF PLYWOOD (20mm thick) OR ITS EQUIVALENT.

PACKAGE 1: ECCDE
1 RSUBE8/2024/ECCDE/FS/1/1 PROCUREMENT AND DISTRIBUTION OF ECCDE (PRE-PRIMARY) FURNITURE:
1. Formica faced shelves in 300 x 300 cubicles 42
2. ECCDE plastic table 240
3. Plastic chairs 720
4. Writing desk with 2 drawers 36
5. Wooden arm chair 36
6. AUDIO PLAYER 16
7. MAT 36
8. TOYS 12
9. TV/VCD PLAYER 6
10. PLAYING EQUIPMENT SET (3 Seater swing, 6 Seater merry-go-round, 2 way slide, 6 Seater Sea-saw) 10
1) PORT HARCOURT PRIMARY SCHOOL, PHALGA
2) STATE SCHOOL, OBONOMA, AKULGA
3) AMSS ABUA/ODUAL LGA
4) CPS II ELEKAHA, PORT HARCOURT, PHALGA
5) MPS OMUANYA, IKWERRE LGA
6) BUPS II BODO, GOKANA LGA
7) SPS II APPAJO, ELEME LGA
8) OPOBO PS OPOBO TOWN, OKOLGA
9) S.S UAI-UPATA, AHELGA
10) UPE ADANTA ISIOKPO, IKWERRE LGA
11) S.S UMUAKURU, ETCHE LGA
12) MPS I ZAAKPON, KHAHA LGA
12 WEEKS

PACKAGE 2: PRIMARY
1 RSUBE8/2024/PRIM/FS/2/1
1. 2- Seater pupils’ desk 725
2. Teachers’ table with 2 drawers 36
3. Teachers’ wooden Arm chair 36
4. Executive desk L shaped 6
5. Executive metal Arm chair 6
6. Visitors High wooden chair 36
7. 4 Drawer filing cabinets 10
8. Book shelf 1.8m x 1.8m 4 layers 6
1) SALVATION ARMY S.S HARCOURT, PORT-
2) S.P.S 2 ABAPO, ELEME LGA
3) C.P.S LOCATION, OYIGBO LGA
4) S.P.S AMAJI, OMUMA LGA
5) C.P.S IBULUYA DIKIBO, OBIGBA LGA
6) ST. MARTINS OGU, OGU/BOLO LGA
12 WEEKS

2 RSUBE8/2024/PRIM/FS/2/2
1. 2- Seater pupils’ desk 720
2. Teachers’ table with 2 drawers 48
3. Teachers’ wooden Arm chair 48
4. Executive desk L shaped 7
5. Executive metal Arm chair 7
6. Visitors High wooden chair 11
7. 4 Drawer filing cabinets 7
8. Book shelves 1.8m x 1.8m 4 layers 7
7) S.S OZUZU, ETCHE LGA
8) C.P.S RUMUEME, OBALGA LGA
2) C.P.S ISWURUTA, IKWERRE LGA
3) S.S. 1 NDELE, EMOHUA LGA
4) ST. BATHOLOMEW DEGEMA, DEGEMA LGA
5) C.L.S. BIAMI, KHAHA LGA
6) T.P.S NWEO, GOKANA LGA
7) C.P.S 1 NKORO, OPOBO/NKORO LGA
8) S.S ISODU, EMOHUA LGA
12 WEEKS

3 RSUBE8/2024/PRIM/FS/2/3
1. 2- Seater pupils’ desk 690
2. Teachers’ table with 2 drawers 48
3. Teachers’ wooden Arm chair 48
4. Executive desk L shaped 8
5. Executive metal Arm chair 8
6. Visitors High wooden chair 15
7. 4 Drawer filing cabinet 8
8. Book shelves 1.8m x 1.8m 4 layers 8
1) S.S 2 AMURUTO TOWN, AKOLGA
2) C.P.S ODIDO, AHELGA
3) C.P.S OKPOSI, OYELGA
4) S.P.S EKPORO, ELEME LGA
5) UPE MPS ABONNEMA, AKOLGA
6) M.P.S OKPO, ASALGA
7) U.P.E UMBO, AHELGA
8) S.S BUGUMA, ASALGA
12 WEEKS

PACKAGE 3: JSS
1 RSUBE8/2024/JSS/FS/3/1
1. 2- Seater pupils’ desk 1150
2. Teachers’ table with 2 drawers 98
3. Teachers’ wooden Arm chair 116
4. Visitors’ wooden Armless chair 16
5. Executive desk L shaped 8
6. Executive metal Arm chair 8
7. Visitors High wooden chair 16
8. 4 Drawer filing cabinets 8
9. Book shelves 1.8m x 1.8m 4 layers 8
C.S.S UJURARA, KHAHA LGA
2) C.S.S UMUOYI, ETCHE LGA
3) EBUKUMA, ANDONI LGA
4) C.S.S KALABAMA, OKOGBA
5) C.L.S OBEYE, OYIGBO LGA
6) C.S.S KALIO-AMA, OKRIKA LGA
7) ST. BATHOLOMEW BURUKIRI, BONNY
8) UPATA C.L.S ODAKIDI, AHELGA
9) G.C.L.S OBOGONOMA, ABUA/ODUAL LGA
10) B.M.G.S BORI, KHAHA LGA
11) C.L.S EKEIN, KHAHA LGA
12 WEEKS

2025, (1ST & 2ND Qtr.) CIVIL WORK: PHYSICAL INFRASTRUCTURE- NEW CONSTRUCTION
LOT NO. CONTRACT ID. NO. SCHOOL LOCATION LGA DURATION

CIVIL WORK: PHYSICAL INFRASTRUCTURE- CONSTRUCTION
PACKAGE 1: CONSTRUCTION OF NEW BLOCK OF CLASSROOMS WITH TOILET FACILITIES – ECCDE
1 RSUBE8/2025/1/ECCDE/NC/1/1 Construction of 1no block of 3 classrooms with 3 rooms sleeping area and 3 rooms toilets at STATE SCHOOL, OYIGBO WEST with fabrication and distribution of Eccde play facilities & accessories. OYIGBO 16 WEEKS
2 RSUBE8/2025/1/ECCDE/NC/1/2 Construction of 1no block of 3 classrooms with 3 rooms sleeping area and 3 rooms toilets at PRIMARY SCHOOL 1 NODIWA with fabrication and distribution of Eccde play facilities & accessories. TAI 16 WEEKS

PACKAGE 2: CONSTRUCTION OF NEW BLOCK OF CLASSROOMS WITH TOILET FACILITIES – PRIMARY
1 RSUBE8/2025/1/PRIM/NC/2/1 Construction of Block of 1 no. 8 Classrooms including 11 rooms toilet, H/m’s Office and store at CPS ELETA ONELGA 16 WEEKS

PACKAGE 3: CONSTRUCTION OF BLOCK WALL FENCING WITH EXTERNAL INTERLOCKING TILES AND GATE HOUSE- PRIMARY
1 RSUBE8/2025/1/PRIM/FC/3/1 Construction of Block wall Perimeter Fencing with Gatehouse at PRIMARY SCHOOL 1 BORI KHAHA 12 WEEKS
2 RSUBE8/2025/1/PRIM/FC/3/2 Construction of Block wall Perimeter Fencing with external interlocking tiles and Gatehouse at COMMUNITY PRIMARY SCHOOL RUMUADA EMOHUA 12 WEEKS

PACKAGE 4: CONSTRUCTION OF NEW BLOCK OF CLASSROOMS – JSS
1 RSUBE8/2025/1/JSS/NC/4/1 Construction of 1No. Block of 6 Classrooms including Principal’s Office, 2 V.P’s offices, General office, Staff room and a store at CSS OMUJHECHI ALUU IKWERRE 16 WEEKS

PACKAGE 5: CONSTRUCTION OF BLOCK WALL FENCING WITH EXTERNAL INTERLOCKING TILES AND GATE HOUSE- PRIMARY
1 RSUBE8/2025/1/JSS/FC/5/1 Construction of Block wall Perimeter Fencing with Gatehouse at CSS QUEENS TOWN OPOBO OPOBO/NKORO 12 WEEKS
2 RSUBE8/2025/1/JSS/FC/5/2 Construction of interlocking tiles and filling with landscaping at CSS RUMUEPIRKOM OBIO/AKPOR 12 WEEKS

GRASSROOT INITIATIVE FOR STRENGTHENING COMMUNITY RESILIENCE (GISCOR)-INVITATION TO TENDER FRAMEWORK & LONG-TERM AGREEMENTS (FWA

GISCOR
GRASSROOT INITIATIVE FOR STRENGTHENING COMMUNITY RESILIENCE (GISCOR)
www.giscor.org • procurement@giscor.org

INVITATION TO TENDER
FRAMEWORK & LONG-TERM AGREEMENTS (FWA)

GISCOR INVITES QUALIFIED, ELIGIBLE, AND REPUTABLE SUPPLIERS, CONTRACTORS, AND SERVICE PROVIDERS TO SUBMIT COMPETITIVE TENDERS FOR ESTABLISHING FRAMEWORK AND LONG-TERM AGREEMENTS FOR THE SUPPLY OF GOODS AND PROVISION OF SERVICES UNDER THE CATEGORIES BELOW.

TENDER CATEGORIES

REFERENCE NUMBERCATEGORYLOCATION
NG_GISCOR_STATIONERY_FWA_2026_07_005OFFICE & STATIONERY SUPPLYNW / NE NIGERIA
NG_GISCOR_CLEANINGITEM_FWA_2026_07_006CLEANING & HYGIENE MATERIALSNW / NE NIGERIA
NG-GISCOR-PRINTING-FWA-2026-07-001PRINTING & PUBLICATION SERVICESNW / NE NIGERIA
NG_GISCOR_VEHICLERENTAL_FWA_2026_07_003FLEET & VEHICLE RENTAL SERVICESNW / NE NIGERIA
NG_GISCOR_DIGNITYKIT_FWA_2026_07_008HUMANITARIAN RELIEF / NFISNW / NE NIGERIA
NG-GISCOR-REFRESHMENT-FWA-2026-07-002REFRESHMENT & CATERING SERVICESNW / NE NIGERIA
NG-GISCOR-FUELSUPPLY-FWA-2026-07-004FUEL SUPPLYNW / NE NIGERIA

AFRICAN REINSURANCE CORPORATION(AFRICA RE)-INVITATION TO TENDER FOR THE SUPPLY, INSTALLATION & COMMISSIONING OF LUGGAGE X-RAY SCANNER AND WALK-THROUGH METAL DETECTOR FOR AFRICA RE LAGOS AND ABUJA OFFICE BUILDING


SUPPLY, INSTALLATION & COMMISSIONING OF LUGGAGE X-RAY SCANNER AND WALK-THROUGH METAL DETECTOR FOR AFRICA RE LAGOS AND ABUJA OFFICE BUILDING
LAGOS, NIGERIA
CLOSING DATE FOR APPLICATIONS: 2026-07-30

INTRODUCTION

The AFRICAN REINSURANCE CORPORATION (“Africa Re” or “the Corporation”) is an international organization with a mission “to foster the development of the insurance and reinsurance industry in Africa; to promote the growth of national, regional, and sub-regional underwriting and retention capacities and to support African economic development.”

As a supranational organization, the Corporation was created pursuant to the Agreement Establishing Africa Re, which was executed in 1976 by the following founding shareholders:

• 42 Member States of the African Union (AU), and

• African Development Bank (AfDB),

In subsequent years, the following additional shareholders joined the Corporation’s shareholding:

• 112 African insurance and reinsurance companies registered in the Member States, and

• 3 leading global insurance and reinsurance groups.

This above Agreement confers on the Corporation its current status as a multilateral institution as well as the legal authority to operate in Member States. Africa Re, however, operates in other non-member States where it has registered subsidiaries, agencies, and offices.

With its Headquarters in Lagos (Nigeria), Africa Re operates in Africa, through

• 6 Regional offices in Abidjan (Côte d’Ivoire), Cairo (Egypt), Casablanca (Morocco), Lagos (Nigeria), Nairobi (Kenya), and Ebène (Mauritius),

• 3 Local Offices in Addis Ababa (Ethiopia), Khartoum (Sudan), Kinshasa (DR Congo),

• 2 Underwriting Representative Offices in Kampala (Uganda), and

• 2 Subsidiaries: Africa Re South Africa Limited in Johannesburg (South Africa), African Retakaful Company in Cairo (Egypt), and

Africa Re operates outside Africa, through

• 1 Underwriting Agency (Africa Re Underwriting Agency Limited) in the Dubai International Financial Centre (DIFC), Dubai (UAE), and

• 1 Branch Office in the International Financial Services Centre (IFSC), GIFT City (India).

The Corporation has the highest international financial strength and credit ratings by any indigenous reinsurer in Africa, with A (Strong / Stable Outlook) with Standard & Poor’s and A (Excellent / Stable Outlook) with AM Best. This is without any callable capital or parental guarantee or any other shareholders’ guarantee.

OBJECTIVES

The African Reinsurance Corporation (hereinafter referred to as “Africa Re”) invites proposals from suitably qualified, experienced, and authorised vendors for the supply, installation, commissioning, and operator training of three (3) dual-energy X-ray luggage scanners and two (2) walk-through metal detectors at its premises, distributed as follows:

• 2 units — Dual-Energy X-Ray Luggage Scanner (Abuja Head Office)

• 1 unit — Dual-Energy X-Ray Luggage Scanner (Lagos Head Office)

• 2 units — Walk-Through Metal Detector (Abuja Head Office)

The scope shall further include the decommissioning and relocation of the existing luggage scanner unit at the Lagos office.

In furtherance of its commitment to maintaining a robust and effective access control and security screening programme, Africa Re has resolved to procure new, state-of-the-art equipment of specified models and capabilities, in line with current international security standards.

The primary objectives of this project are as follows:

FEDERAL POLYTECHNIC OROGUN, DELTA STATE-INVITATION TO TENDER FOR YEAR 2026 TETFUND ZONAL INTERVENTION

FEDERAL POLYTECHNIC
OROGUN, DELTA STATE.
INVITATION TO TENDER FOR YEAR 2026 TETFUND ZONAL INTERVENTION

1.0 BACKGROUND
1.1 Federal Polytechnic, Orogun, Delta State is a beneficiary of the Year 2026 TETFund Zonal Intervention Project of Tertiary Education Trust Fund (TETFund).
1.2 Accordingly, and in line with the provisions of the Public Procurement Act 2007, the Polytechnic hereby invites interested and reputable Contractors/Suppliers with relevant experience and track record to submit Technical Bid for the projects listed below:

1. SCOPE OF WORKS
Procurement, Installation, Testing and Commissioning of Furniture and Equipment for the Federal Polytechnic, Orogun, Delta State.

2. ELIGIBILITY REQUIREMENTS
a. Evidence of certificate of Incorporation issued by Corporate Affairs Commission (CAC) including Form CAC, or CAC and CAC;
b. Evidence of Company’s income tax clearance for the last three (3) years valid till December 31st, 2025 with minimum average annual turnover of ₦1B
c. Evidence of Pension Clearance Certificate for the last three (3) years (this requirement is only applicable to bidders whose number of staff is 15 and above.);
d. Evidence of Industrial Training Fund (ITF) Compliance Certificate valid till December 31st, 2026 (this requirement is only applicable to staff whose number is staff is 5 and above or the bidder’s annual turnover is ₦50Million and above.);
e. Evidence of Nigerian Social Insurance Trust Fund (NSITF) Clearance Certificate valid till December 31st, 2026;
f. Evidence of Registration on the National Database of Federal Contractors, Consultants and Service Providers by submission of Interim Registration Report (IRR) expiring on 31/12/2026 or valid certificate issued by BPP;
g. Sworn affidavit:
– disclosing whether or not any officer of the relevant committees of the Federal Polytechnic, Orogun or Bureau of Public Procurement is a former or present Director, Shareholder or has any pecuniary interest in the bidder and to confirm that all information provided in its bid are true and correct in all particulars;
– that no Director has been convicted in any Country for any criminal offence relating to fraud or financial impropriety or criminal misrepresentation or falsification of facts relating to any matter;
– that the company is not in receivership, the subject of any form of insolvency or bankruptcy proceedings or the subject of any form of winding up petition or proceedings;
– that the company does not have existing loan or financial liability with any bank, other financial institutions or third party as doubtful, non-performance, bad or whose repayment portion has been outstanding for the last four (4) months;
h. Letter of authorization as the representative of the Original Equipment Manufacturer (OEM);
i. Company’s Audited Account for the last three (3) years – 2023, 2024 & 2025;
j. Reference letter from a reputable bank in Nigeria including willingness to provide credit facility for the execution of the project when needed;
k. Company’s profile with Curriculum Vitae of key staff to be deployed for the project, including copies of their Academic/Professional such as COREN, QSRBN, ARCON, CORBON, etc;
l. Verifiable documentary evidence of at least three (3) similar jobs (in size, nature and complexity), executed in the last five (5) years including Letters of Award, Valuation Certificate, Job Completion Certificates and Photographs of the Projects;
m. For Joint Venture/Partnership, Memorandum of Understanding (MoU) should be provided (CAC, Tax Clearance Certificate, Pension Clearance Certificate, ITF Compliance Certificate, NSITF Clearance Certificate, IRR and sworn Affidavit are compulsory for each JV Partner);

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us