HIGH COURT OF THE FEDERAL CAPITAL TERRITORY, ABUJA-ADDENDUM NO. 1 / CORRIGENDUM TO THE INVITATION FOR PRE-QUALIFICATION FOR THE 2026 CAPITAL PROJECTS

HIGH COURT OF THE FEDERAL CAPITAL TERRITORY, ABUJA
INVITATION FOR PRE-QUALIFICATION FOR THE YEAR 2026 CAPITAL PROJECTS

1. INTRODUCTION
The High Court of the Federal Capital Territory in compliance with the provision of the Public Procurement ACT (PPA) 2007, invites Competent and Experienced Contractors/Consulting firms to apply for the under listed projects in the fiscal year, 2026.

2. SCOPE OF WORKS AND SERVICES
LOTS | PROJECTS DESCRIPTION

CATEGORY A: WORKS & GOODS
LOT 1: RENOVATION AND REHABILITATION
Lot 1a: Renovation/Rehabilitation of Court Building
Lot 1b: Renovation/Rehabilitation of Official Residences

LOT 2 PROVISION OF SOLAR POWER ELECTRICITY
Lot 2a: Supply of Office Equipment
Lot 2b: Supply and Installation of Solar Power Back-up System

CATEGORY B: CONSULTANCY SERVICES
Lot 3: Consultancy Services for Renovation/Rehabilitation of Court Building

Prospective Companies shall submit the following documents and without any of which the Company will automatically be disqualified:
a. Evidence of Certificate of Incorporation issued by the Corporate Affairs Commission (CAC) including FormCAC1.1 or CAC2 and CAC7.
b. Evidence of Current Annual Returns to Corporate Affairs Commission.
c. Evidence of Company’s Income Tax Clearance Certificate (or Personal Income Tax Clearance Certificate of all the Partners in case of Business Name) for the last three (3) years valid till 31st December, 2026.
d. Evidence of Pension Clearance Certificate valid till 31st December, 2026 (this requirement is only applicable to bidders whose number of Staff is 3 and above);
e. Evidence of Industrial Training Fund (ITF) Compliance Certificate valid till 31st December, 2026 (this requirement is only applicable to bidders whose number of staff is 3 and above or the bidder’s annual turnover is N50m and above);
f. Evidence of Nigeria Social Insurance Trust Fund (NSITF) Clearance Certificate valid till 31st December, 2026;
g. Evidence of Registration on the National Database of Federal Contractors, Consultants and Service Providers by submission of Interim Registration Report (IRR) expiring on 31/12/2026 or valid Certificate issued by BPP.
h. Sworn Affidavit:
– disclosing whether or not any officer of the relevant committees of the High Court of the Federal Capital Territory or the Bureau of Public Procurement is a former or present Director, shareholder or has any pecuniary interest in the bidder and to confirm that all information presented in its bid are true and correct in all particulars;
– that no Director has been convicted in any Country for any criminal offence relating to fraud or financial impropriety or criminal misrepresentation or falsification of facts relating to any matter;
– that the Company is not in receivership, the subject of any form of insolvency or bankruptcy proceedings or the subject of any form of winding up petition or proceedings;
– that the company does not have existing loan or financial liability with a bank, other financial institution or third party that is classified as doubtful, non-performance, bad or whose repayment portion has been outstanding for the last four (4) months;
i. Company’s Audited Accounts for the last three (3) years -2023, 2024, 2025;
j. Bank Reference Letter addressed to the Chief Registrar, High Court of the Federal Capital Territory, Abuja from a reputable Commercial Bank in Nigeria indicating willingness to provide credit facility for the execution of the project when needed;
k. Company’s Profile with the Curriculum Vitae of Key Staff to be deployed for the project, including copies of their Academic and Professional Qualifications such as Architect, Quantity Surveyor, Electrical Engineer, Mechanical Engineer and Civil Engineer.
l. Evidence of Firm’s current registration with relevant regulatory professional body(ies) such as ARCON, QSRBN and COREN (applicable to Lot 1A & 1B).
m. List of Plants and Equipment with proof of Ownership/Lease Agreement (applicable to Lot 1A & 1B).
n. Verifiable documentary evidence of at least three (3) similar jobs (in size, nature & complexity) executed in the last five (5) years as Prime Consultant including Letters of Engagement, Valuation Certificates and Photographs of the projects (applicable to Lot 4).
o. Verifiable documentary evidence of at least three (3) similar jobs (in size, nature & complexity) executed in the last five (5) years including Letters of Awards, Valuation Certificates, Job Completion Certificates and Photographs of the projects (applicable to Lot 1A & 1B).
p. For Joint Venture/Partnership, Memorandum of Understanding (MOU) should be provided indicating among others the Lead Partner (CAC, Tax Clearance Certificate, Pension Compliance Certificate, ITF Compliance Certificate, NSITF Compliance Certificate, IRR & Sworn Affidavit are compulsory for each JV Partner).
q. All documents for submission must be transmitted with a Covering/Forwarding letter under the Company/Firm’s Letter Head Paper bearing amongst others, the Registration Number (RC) as issued by the Corporate Affairs Commission (CAC), Contact Address, Telephone Number (preferably GSM No.), and e-mail address. The Letterhead Paper must bear the Names and Nationalities of the Directors of the Company at the bottom of the page, duly signed by the authorised officer of the firm.

DANISH REFUGEE COUNCIL (DRC)-INVITATION TO TENDER FOR REHABILITATION OF BOREHOLES (MANUAL AND SOLAR) AND EMERGENCY SANITATION FACILITIES

REHABILITATION OF BOREHOLES (MANUAL AND SOLAR) AND EMERGENCY SANITATION FACILITIES

Dear Sir/Madam:

The DANISH REFUGEE COUNCIL (DRC) has received a grant from ECHO for the implementation of humanitarian aid operation entitled in the northeast and Northwest of Nigeria. Part of this operation is the Rehabilitation of Boreholes (Manual and solar) and Emergency Sanitation FacilitiesTherefore, the DRC requests you to submit proposal bid(s) for the supply of the item(s) listed on the Proposal Package.

LineItemTime, date, address as appropriate
1ITB published24th  July 2026
2Clarification / Technical QuestionsFor questions and clarification send an email to procurement.nga@drc.ngo
3Closing date for clarifications31st July 2026 (4:00pm) Nigerian Time
4Closing date and time for receipt of bids6th August 2026 (5:00 PM) Nigerian Time

CENTRE FOR ADVOCACY, TRANSPARENCY AND ACCOUNTABILITY INITIATIVE (CATAI)-INVITATION TO TENDER FOR PROVISION OF VEHICLE HIRE SERVICES FOR FIELD MOBILITY

CENTRE FOR ADVOCACY, TRANSPARENCY AND ACCOUNTABILITY INITIATIVE (CATAI)
NATIONAL OPEN TENDER DOCUMENT
PROVISION OF VEHICLE HIRE SERVICES FOR FIELD MOBILITY

Under the COMPASS Year 2 Project

Tender Reference 2026 / FCDO / NGA-000385-06 (FCDO Year 2) / 136
Procurement Method National Open Tender
Project COMPASS Year 2 — NGA-000385-06 (FCDO Year 2)
Donor / Grant FCDO (implemented with the Danish Refugee Council)
Service Locations Bama, Banki, Ngala, Gwoza, Damasak and Madagali
Contract Period 1st August, 2026 to 31st March, 2027
Issue Date 23rd July, 2026
Clarification Deadline 30th July, 2026 — 5:00 PM
Submission Deadline 6th August, 2026 — 12:00 PM (Noon)
Tender Opening 7th August, 2026 — 10:00 AM

This Tender Document is issued for the purpose of inviting competitive tenders. It does not constitute an offer or a contract. CATAI reserves the right to accept or reject any tender without obligation to give reasons.

SECTION 1 — INTRODUCTION AND BACKGROUND

The Centre for Advocacy, Transparency and Accountability Initiative (CATAI), with support from the Danish Refugee Council (DRC) under the FCDO-funded COMPASS Project, is implementing protection monitoring and community-based protection activities in Bama, Banki, Ngala, Gwoza, Damasak and Madagali LGAs of Borno and Adamawa States.

To ensure timely and safe delivery of project activities — including protection monitoring, community sensitisation, data collection and beneficiary follow-up — CATAI requires reliable vehicle-hire services for the movement of staff and materials to and within the project locations. CATAI therefore invites eligible service providers to tender for the provision of these services in accordance with this Tender Document.

SECTION 2 — SCOPE OF SERVICES AND SCHEDULE OF REQUIREMENTS

The selected service provider(s) shall provide roadworthy vehicles with experienced drivers to support field mobility across the six (6) service locations for the contract period. The indicative schedule of requirements is set out below. Each location requires an estimated 128 service days (16 days per month over 8 months).

S/N Service Location Description of Service (Vehicle Type) Unit Total Days
1 Bama Provision of vehicle services (Tricycle — NAPEP) for protection monitoring activities. Day 128
2 Banki Provision of vehicle services (Tricycle — NAPEP) for protection monitoring activities. Day 128
3 Ngala Provision of transport services (Tricycle — NAPEP) for protection monitoring activities. Day 128
4 Gwoza Provision of transport services (Tricycle — NAPEP) for protection monitoring activities. Day 128
5 Madagali Provision of transport services (Tricycle — NAPEP) for protection monitoring activities. Day 128
6 Damasak Provision of vehicle services (Saloon Golf Wagon or Mercedes Wagon) for protection monitoring activities. Day 128

Note: Quantities are estimates based on planned field activities and may vary with operational need. Payment shall be made only for services actually rendered and verified.

SECTION 3 — VEHICLE SPECIFICATIONS AND SERVICE REQUIREMENTS

The service provider shall, at its own cost, meet the following minimum requirements:

  • Provide vehicles suitable for field missions in hard-to-reach and rough-terrain LGAs.
  • Ensure that all vehicles are roadworthy, in good mechanical condition, and (where possible) air-conditioned.
  • Fit each vehicle with basic safety equipment — spare tyre, jack, fire extinguisher and first-aid kit — and functional seat belts for all passengers.
  • Provide experienced drivers who are familiar with the operational areas and the prevailing security context.
  • Ensure all vehicles have valid registration, insurance and roadworthiness certificates throughout the contract period.
  • Keep all vehicles fuelled, serviced and maintained at the service provider’s own cost.
  • Be flexible to respond to CATAI’s travel schedules, including weekend or emergency deployments where necessary.

Vehicle categories:

  • Tricycle (NAPEP) — for Bama, Banki, Ngala, Gwoza and Madagali: in good mechanical condition, with a competent, registered rider.
  • Saloon Golf Wagon or Mercedes Wagon — for Damasak: minimum 4 passenger seats, petrol with efficient fuel consumption, and not more than 8 years old.

SECTION 4 — ELIGIBILITY AND QUALIFICATION CRITERIA

To be considered, a vendor must satisfy ALL of the following mandatory requirements. Each requirement is assessed on a Pass/Fail basis; a single failure disqualifies the tender from further evaluation.

# Mandatory Eligibility Requirement (each supported by documentary evidence)
1 Valid CAC Certificate of Incorporation or Business Name Registration.
2 Current Tax Clearance Certificate and valid Tax Identification Number (TIN).
3 Evidence of at least three (3) similar vehicle-hire / transport service contracts executed within the last five (5) years.
4 Audited financial statements (last 2 years) OR bank statements (last 6 months) demonstrating financial capacity.
5 Verifiable evidence of a fleet capable of covering the required LGAs, with valid vehicle registration, insurance and roadworthiness particulars.
6 Signed Declaration of Impartiality, Confidentiality and Conflict of Interest (where required) and a signed Tender/Bid Submission Form.
7 Vendor not appearing on any debarment, suspension, sanction or ineligibility list.

SECTION 5 — INSTRUCTIONS TO BIDDERS

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

MANAGEMENT SCIENCES FOR HEALTH (MSH)-ADDENDUM TO REQUEST FOR QUOTE FOR THE SUPPLY OF MEDICAL CONSUMABLES, ACCESSORIES AND BRANDED ITEMS

REFERENCE NUMBER: REOI/MSH/NIG/PCH/01
CATEGORY A: PROVISION OF PRINTING AND BRANDING SERVICES
CATEGORY B: SUPPLY OF MEDICAL CONSUMABLES AND ACCESSORIES

OVERVIEW
MANAGEMENT SCIENCES FOR HEALTH (MSH) is a global nonprofit organization that provides governments, health organizations, and the private sector with strategies, tools, and management support to effectively and efficiently deliver high-functioning health systems. We are a mission-driven, global health nonprofit. For more than 50 years, we have focused on the people at the heart of the health system in each environment in which we work, and since our founding in 1971, MSH has improved health systems in more than 150 countries worldwide. For more information, visit: https://msh.org/who-we-are/

SCOPE OF WORK

MSH Nigeria is looking for reputable and qualified companies for the supply and delivery of goods and services for the identified categories below. Qualified suppliers with the required qualifications, experience, and skills interested in working with MSH Nigeria are to submit a quote via the links provided below.

Applications are hereby invited for the following categories, provided the potential vendors demonstrate that the categories are within their specialization:

CATEGORY A: PROVISION OF PRINTING AND BRANDING SERVICES (Lot 1 & 2)

Printing and Branding companies.

CATEGORY B: SUPPLY OF MEDICAL AND LAB CONSUMABLES AND ACCESSORIES (Lot 3 to 8)

Pharmaceutical Firms, Laboratory Consumables and Accessories Manufacturers, Distributors and Suppliers

ELIGIBILITY REQUIREMENTS

MSI REPRODUCTIVE CHOICES, ABUJA-REQUEST FOR EXPRESSION OF INTEREST FOR THE SUPPLY OF PROMOTIONAL MATERIALS

MSI REPRODUCTIVE CHOICES
REQUEST FOR EXPRESSION OF INTEREST (REOI)
SUBJECT: SUPPLY OF PROMOTIONAL MATERIALS – 3
DATE OF THE REOI: 24TH JULY 2026
CLOSING DATE FOR RECEIPT OF EOI: 7TH AUGUST 2026
REFERENCE: EOI/031/2026

Background
MSI Nigeria Reproductive Choices is a social enterprise established in Nigeria in 2009 and is a leading provider of family planning and a range of contraceptive options to women, girls, and families across the 36 states of Nigeria and the FCT. With a mission to ensure children by choice not chance, MSI Nigeria envisions a world where every birth is wanted. Through collaborations with government at the national, state, and community levels, MSI Nigeria offers accessible and comprehensive reproductive healthcare services using operational approaches, such as Marie Stopes Medical Centres, community outreach teams, public sector strengthening support, and a toll-free contact centre.

Description of requirements:
MSI Nigeria is inviting Expressions of Interest (EOIs) from eligible suppliers for supply of the item below:

S/N Description of Item Quantity
1 MSI Branded Giant Umbrella
Specification:
– Double layered Cover
– UV double coated
– Color: Cyan Blue
– 8 springs
– Canopies to be branded: 4 areas
– Umbrella holder to be branded as seen on artwork
– Print Technique: Flex, Screen-print and DTF
– Size of artwork: A3
See link Below https://bit.ly/4vzRuJH
500pcs
2 MSI Branded Quality 8-Spring Umbrella
– Two different Colors – White and Blue
– UV Double coated
– 8 Springs
– Areas to be branded: 4
– Print Technique: Flex, Screen-print and DTF
– Size of artwork: A4
See link Below https://bit.ly/4vzRuJH
1,400 pcs
3 MSI Branded Power Bank
Specification
– Oraimo
– 30,000 mAH
– Art work: As seen on the Mockup
– Print Technique: UV Print
See link Below https://bit.ly/4vzRuJH
700pcs
4 MSI Branded Logo Mettallic Keyholder
Specifications:
– Product: Custom Die-Cut Hard Enamel Metal Keyholder
– Material: Premium Zinc Alloy
– Finish: Mirror Polished Gold Plating
– Enamel: Premium Hard Enamel (Smooth, Glossy Finish)
– Shape: Custom die-cut following the unique outline of the logo, including the arched top. Not a standard rectangle.
– Artwork: Preserve the supplied logo exactly. No redesign or simplification. Maintain all colours, typography, proportions and hotline number (22252).
– Background: White enamel background with polished gold borders around all elements.
– Size: Approximately 55 mm (H) x proportional width
– Thickness: 2.0 mm – 3.0 mm
– Key Ring: 30 mm premium gold split ring with matching gold connector
– Back: Smooth polished gold
– Artwork Format: Vector file (PNG/PDF)
– Quality: Jewelry-grade finish with precise colour matching, clean polished edges, no scratches, bubbles, or colour bleeding. Individually packed in polybags.
See link Below https://bit.ly/4vzRuJH
7,000pcs
5 MSI Branded Apron with Messages
Specifications:
Polyester – 80%
Cotton – 20%
Colors: Blue and White
See link Below https://bit.ly/4vzRuJH
1,400pcs

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

MSI NIGERIA REPRODUCTIVE CHOICES, ABUJA-CLOSED BID AUCTION OF USED MOTOR VEHICLES AND GENERATORS


MSI NIGERIA REPRODUCTIVE CHOICES
REQUEST FOR EXPRESSION OF INTEREST (REOI)
SUBJECT: DISPOSAL OF ASSETS
DATE OF THE REOI: 24/07/2026
CLOSING DATE OF EOI: 06/8/2026
REFERENCE: EOI/032/2026

Description of requirements:
Since 2009, MSI Nigeria Reproductive Choices has worked in Nigeria to increase access to high quality, acceptable and affordable sexual and reproductive health (SRH) services for all people. MSI Nigeria is a result-oriented social enterprise that develops efficient, effective and sustainable family planning Programmes in Nigeria.

MSI Nigeria is inviting Expressions of Interests (EOIs) from interested individuals or companies to bid for purchase of used motor vehicles and Generators as listed below:

Lot NumberSerial Number / SpecificationDescriptionLocation
VH001AHTEX12G0095080472013 Toyota HiluxNO. 62, GASHAN STREET, BEHIND WELLCARE SUPERMARKET, NASARAWA GRA KANO STATE NIGERIA.
VH002JTDBW9231012458722013 Toyota YarisNO. 59, ANTHONY ENAHORO STREET, UTAKO FCT ABUJA
VH003AHTEX12G0095080332014 Toyota HiluxGraphic Old building Complex, Opposite State Ministry of Health (SMOH) Lokoja, Kogi state
VH004AHTEX12G2095080652014 Toyota HiluxNO.1, DAVID MARK STREET, OPPOSITE NANA AISHA ISLAMIYA, BUBA SHONGO ESTATE, GOMBE STATE NIGERIA.
VH0056FPPXXMJ2PEB191792013 Ford RangerMINISTRY OF HEALTH, INDEPENDENCE WAY, KADUNA, KADUNA STATE NIGERIA
VH0066FPPXXMJ2PEB191752013 Ford RangerZone E, No. 53 Farm Center, Behind Peace Corps Office, Minna, Niger State
VH007JHHUJL07XOK0064352011 Toyota DynaPLOT 162A, INDEPENDENCE LAYOUT, TOSCANA ROAD, ENUGU
VH008AHTEX12G5095080442014 Toyota HiluxNO.1, DAVID MARK STREET, OPPOSITE NANA AISHA ISLAMIYA, BUBA SHONGO ESTATE, GOMBE STATE NIGERIA
VH009AHTEX12G0095083102014 Toyota HiluxPLOT 284, RGC STREET, OFF OLADIPO DIYA STREET, BESIDES GAMES VILLAGE, KAURA DISTRICT, FCT ABUJA NIGERIA.
VH0102T1BURHE9FC2927022016 Toyota CorollaGraphic Old building Complex, Opposite State Ministry of Health (SMOH) Lokoja, Kogi state
VH011AHTFX22G6080163812012 Toyota HiluxRimi Close, Behind Sharia Commission Office, Old GRA Bauchi
VH0125TDYK3EH6DS1262822013 Toyota Highlander154/10B, Don Etiebet Housing Estate, Maiduguri Byepass, Damaturu, Yobe State.
VH0135TDDK3EH1DS2758752013 Toyota HighlanderPLOT 162A, INDEPENDENCE LAYOUT, TOSCANA ROAD, ENUGU
VH0142T1BU4EE4AC3457122010 Toyota CorollaNO. 22, MAHMUD STREET, OFF SAMA ROAD AREA, SOKOTO STATE NIGERIA.
VH0152T1BU4EE4AC3569362010 Toyota CorollaNo 7 Kobomoje street, behind D’Rovans Hotel, Ring Road, Ibadan, Oyo State. Nigeria.
VH0161NXBU4EE9AZ3285812010 Toyota CorollaNo 7 Kobomoje street, behind D’Rovans Hotel, Ring Road, Ibadan, Oyo State. Nigeria.
VH0172T1BU4EE7AC5165652010 Toyota CorollaNO.1, DAVID MARK STREET, OPPOSITE NANA AISHA ISLAMIYA, BUBA SHONGO ESTATE, GOMBE STATE NIGERIA
VH0182T1BU4EE4AC3445132010 Toyota CorollaNO. 62, GASHAN STREET, BEHIND WELLCARE SUPERMARKET, NASARAWA GRA KANO STATE NIGERIA.
VH0192T1BU4EE6BC7455012011 Toyota CorollaNO. 36 IMUETINYAN STREET, OFF AIKHIONBARE STREET, BEHIND WESLEY HOTEL, GRA BENIN CITY, EDO STATE NIGERIA.
VH020AHTEX12G2095083082014 Toyota HiluxNO. 62, GASHAN STREET, BEHIND WELLCARE SUPERMARKET, NASARAWA GRA KANO STATE NIGERIA.
VH021JTDBU4EEXB91462662011 Toyota CorollaNO. 22, MAHMUD STREET, OFF SAMA ROAD AREA, SOKOTO STATE NIGERIA.
VH0222T1BU4EEXBC6434392011 Toyota CorollaNo 7 Kobomoje street, behind D’Rovans Hotel, Ring Road, Ibadan, Oyo State. Nigeria.
GN00133 KVAJMG GeneratorNO. 62, GASHAN STREET, BEHIND WELLCARE SUPERMARKET, NASARAWA GRA KANO STATE NIGERIA.
GN002MP45 – 45 KVAMarapco GeneratorNo 7 Kobomoje street, behind D’Rovans Hotel, Ring Road, Ibadan, Oyo State. Nigeria.
GN003SP 40 – 40 KVAMikano GeneratorNo 7 Kobomoje street, behind D’Rovans Hotel, Ring Road, Ibadan, Oyo State. Nigeria.

SHELL NIGERIA EXPLORATION AND PRODUCTION COMPANY LIMITED-INVITATION TO TENDER FOR PROVISION OF LINER HANGER SERVICES FOR SNEPCO

SHELL NIGERIA EXPLORATION AND PRODUCTION COMPANY LIMITED
CO-VENTURE PARTNERS
NNPC EXXONMOBIL NIGERIAN AGIP EXPLORATION
TENDER OPPORTUNITY: PROVISION OF LINER HANGER SERVICES FOR SNEPCO
NIPEX TENDER NUMBER: SR3214048270 | TENDER REF: CWA125040
NCDMB CERT. NO.: ES/NCDMB/UPD/SNEPCO-DA-101020/290626/
PROVISION OF LINER HANGER SERVICES_CWA125040

1.0 INTRODUCTION
Shell Nigeria Exploration and Production Company Limited (SNEPCo), operator of the Oil Mining lease 118 (OML 118) on behalf of itself and other Co-Venturers consisting of Esso Exploration and Production Nigeria and Nigerian Agip Exploration Company Limited under a Production Sharing Contract (PSC) with Nigerian National Petroleum Corporation (NNPC) hereby invites reputable and competent registered Nigerian companies (NUPRC registered and licensed) with proven experience in the Provision of Liner Hanger Services listed in the scope of work below to apply for inclusion into the bid list of the tender.

2.0 SCOPE OF WORK/SERVICE REQUIREMENTS
Scope of activities under this contract include the following:

Equipment supply scope includes but is not limited to:
– Liner hanger assemblies for 18″ – 7″ casing strings
– Liner packers for 18″ – 7″ casing strings
– Running tools (including liner Hanger Running Tool and TDS tool)
– Float equipment (float shoe, float collar, plugs) for 18″ – 7″ casing strings
– Landing collar for 18″ – 7″ casing strings
– Redress kits for liners assemblies (18″ – 7″ casing strings)

Associated services scope includes but is not limited to:
– Engineering and design support
– System Integration Testing (SIT)
– Assembly, redress, testing and certification
– Wellsite personnel (Liner Hanger Supervisor/Engineer)
– QA/QC documentation and certification
– Postjob reporting (installation, HSSE, deviations)
– Inventory management, preservation and refurbishment
– Deployment and installation of liner hangers and accessories in deepwater wells

3.0 MANDATORY REQUIREMENTS
To be eligible for this tender exercise, interested contractors are required to be pre-qualified as an essential service vendor in any of the following product services:
– 1.01.05 – Cementing Equipment and Liner Hanger System;
– 3.04.15 – Liner Float, Hangers and Running Equipment Services Product/Services) category in NipeX Joint Qualification System (NJQS) database.

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

SHELL NIGERIA EXPLORATION AND PRODUCTION COMPANY LIMITED-INVITATION TO TENDER FOR PROVISION OF COMPLETION EQUIPMENT AND ASSOCIATED SERVICES

SHELL NIGERIA EXPLORATION AND PRODUCTION COMPANY LIMITED
CO-VENTURE PARTNERS
NNPC EXXONMOBIL NIGERIAN AGIP EXPLORATION
TENDER OPPORTUNITY: PROVISION OF COMPLETION EQUIPMENT AND ASSOCIATED SERVICES
NIPEX TENDER NUMBER: SR3213915204 | TENDER REF: CWA127128
NCDMB CERT. NO.: ES/NCDMB/UPD/SNEPCO-DA-101008/240626/PROVISION OF COMPLETION EQUIPMENT AND ASSOCIATED SERVICES_CWA125040

1.0 INTRODUCTION
Shell Nigeria Exploration and Production Company Limited (SNEPCo), operator of the Oil Mining Lease 118 (OML 118) on behalf of itself and other Co-Venturers consisting of Esso Exploration and Production Nigeria and Nigerian Agip Exploration Company Limited under a Production Sharing Contract (PSC) with Nigerian National Petroleum Company Limited (NNPC) hereby invites reputable and competent registered Nigerian companies (NUPRC registered and licensed) with proven experience in the Provision of Completion Equipment and Associated Services listed in the scope of work below to apply for inclusion into the bid list of the tender.

2.0 SCOPE OF WORK/SERVICE REQUIREMENTS
Scope of activities under this contract include the following:

Equipment Supply:

  • Sub Surface Safety Valves (SCSSV) – tubing and wireline retrievable, including accessories
  • Gauges / downhole gauge systems and permanent monitoring equipment/downhole pressure and temperature monitoring equipment
  • Smart completion products; feed through Packers, ICVs etc.
  • Control line / TEC, centralisers, clamps, protectors, spoolers and accessories
  • Packers (permanent and retrievable including accessories; excluding P&A packers as applicable)
  • Tubing accessories: blast joints, flow couplings, telescopic joints, blanks, crossovers and pups
  • Flow control equipment: landing nipples, lock mandrels and accessories
  • Swellable products, latches, seals and mule shoes
  • Single Trip Completion Equipment including remotely activated valves and packers
  • Remotely Operated Completion System
  • Mechanical fluid loss control devices and isolation ball valves
  • Sand control equipment: screens (including shunted screens/OHGP systems), gravel pack packers, Multizone GP equipment and related components

Associated Services:

  • Engineering and technical support, equipment selection and modelling
  • QA/QC, testing, inspection, certification (pre-assembly and in-country)
  • Pre-assembly, make-up and pressure testing (onshore base)
  • Wellsite installation support
  • Planning, scheduling and interface coordination
  • Post-job reporting (installation, HSSE, deviations, NPT)
  • High Pressure Debris Removal, Filtration and wellbore cleanout services
  • Well stimulation with Wash Pipe Jetting tool
  • Long-term post-installation maintenance services
  • Remotely Operated Completion System (ROCS)
  • Single Trip Completion Services
  • Completion recovery services during P&A

3.0 MANDATORY REQUIREMENTS
To be eligible for this tender exercise, interested contractors are required to be pre-qualified as an essential service vendor in any of the following product services:

  • 3.01.07 – Drilling/Completion Engineering Services
  • 3.04.17 – Well Completion Services
  • 1.01.08 – Production String Components
  • 1.01.12 (Down Hole Pressure Control Equipment) (Product/Services) category in NIpeX Joint Qualification System (NIJQS) database.

Only successfully pre-qualified suppliers in these categories will receive a Technical Invitation to Tender (TITT).

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

DELTA STATE MINISTRY OF PRIMARY AND SECONDARY EDUCATION-INVITATION TO TENDER FOR THE EXECUTION OF PROJECTS IN PRIMARY SCHOOLS

DELTA STATE MINISTRY OF PRIMARY AND SECONDARY EDUCATION
PLANNING, RESEARCH & STATISTICS DEPARTMENT
P.M.B. 5015, ASABA.
MINISTERIAL TENDERS BOARD SECRETARIAT
INVITATION TO TENDER

Tenders are hereby invited from suitably qualified companies to execute the projects listed below.

PRIMARY EDUCATION

S/NProject LocationsDescriptions
1Sapele L.G.A Delta State.Renovation of 1 No 4. Classroom Block with offices at Obada Primary School Ibada; Renovation of 1 No 3 Classroom Block at Obada Primary School Ibada; Renovation of 1 No 3 Classroom Block with offices at Okuoke Primary School, Okuoke-Elume; Renovation of 1No.3 Classroom Block without Offices at Alyetan Primary School; Renovation of 1No3. Classroom Block without offices (Class 1-3) at Pemu Primary School.
2Bomadi L.G.A., Delta State.Renovation of 1No 6. Classroom Block with an office; Renovation of 1No. 3 classroom Block without office (Block A); Demolition/ Construction of 1No. 3 classroom block with ground beam (Block B) In Oge Primary School.
3Burutu II L.G.A., Delta State.Renovation of 1No 6. Classroom Block with offices at Egbondi Primary School Bolu-Ndoro; Construction of 1No 4. Toilet Block at Egbondi Primary School Bolu-Ndoro; Renovation of 1No 2. Bedroom Staff Quarters at Ekumu Primary School Ekogbene all in Burutu II L.G.A. Delta State.
4Ukwuani L.G.A., Delta State.Renovation of 1No3. Classroom Block without offices at Ukwata Primary School, Umukwata; Renovation of 1No3. Classroom Block with offices and toilets at Otolum Primary School, Ezionum; Demolition/Construction of 1No.4 classroom block with Offices and toilets at Igwete Primary School Amai.
5Uvwie L.G.A. Delta StateRenovation of main building of the Army Primary School Effurun; Construction of 1No Prototype Block of 4No. Pupil’s toilet/ demolition of dilapidated pit toilet at Imawhe Primary School (Ohorhe2) Ohorhe.

YOLA ELECTRICITY DISTRIBUTION COMPANY PLC-INVITATION TO TENDER FOR THE EXECUTION OF PROJECTS

YEDC
YOLA ELECTRICITY DISTRIBUTION COMPANY PLC
INVITATION TO TENDER
WORLD BANK-FINANCED PROCUREMENT
COUNTRY: NIGERIA
PROJECT NAME: DISTRIBUTION SECTOR RECOVERY PROGRAM (DISREP)
CREDIT NO.: 9206-NG
DATE OF ISSUE: JULY 24, 2026

1. BACKGROUND
The Federal Republic of Nigeria (FGN) has received Five Hundred Million United States Dollars (US$500 million) financing from the World Bank under the Distribution Sector Recovery Program (DISREP), through which the Bureau of Public Enterprises (BPE) will on-lend part of the proceeds to the Distribution Companies (DisCos) as a Shareholder loan to finance certain components of their Performance Improvement Plans (PIPs) prepared by the DisCos and approved by the Nigerian Electricity Regulatory Commission (NERC).

The financing will support contracts for:
a) Rehabilitation of Medium and Low Voltage Distribution Lines.
b) Rehabilitation and Expansion of Available Transformer Capacity.
Accordingly, Yola Electricity Distribution Company Plc, a licensed Electricity Distribution Company regulated by the Nigerian Electricity Regulatory Commission (NERC), invites qualified and reputable contractors to submit bids for eligible procurements under the DISREP PforR intervention.

2. SCOPE OF WORK
– Lot 1A: Procurement of Low Voltage (LV) Cables
– Lot 1B: Procurement of High Voltage (HV) Cables
– Lot 2: Procurement of Concrete Poles

Bidders may submit bids for one or more lots. Each lot will be evaluated separately.

3. ELIGIBILITY AND QUALIFICATION REQUIREMENT
Interested firms must demonstrate capacity and experience by submitting the following:

MANDATORY REQUIREMENTS
1. Certificate of Incorporation with the Corporate Affairs Commission (CAC) (Forms CAC 1.1 or CAC 2 & 7).
2. Evidence of Company’s Income Tax Clearance Certificate for the last three (3) years, valid till 31st December 2026.
3. Evidence of current Pension Compliance Certificate valid till 31st December 2026 (This requirement is only applicable to bidders whose number of staff is 15 and above).
4. Company’s/firm’s Audited financial statements for the last three (3) years (2023, 2024, 2025).
5. Evidence of VAT registration with TIN Number.
6. Evidence of Industrial Training Fund (“ITF”) Compliance Certificate valid till 31st December 2026 (this requirement is only applicable to bidders whose number of staff is 5 and above or the bidder’s annual turnover is N50m and above);
7. Evidence of Nigeria Social Insurance Trust Fund (NSITF) by inclusion of Certificate of Compliance valid until 31st December 2026.
8. Evidence of Registration on the National Database of Federal Contractors, Consultants, and Service Providers by submission of valid Interim Registration Report (IRR) expiring 31st December 2026 or valid Certificate issued by BPP.
9. Evidence of being a duly established LOCAL CABLE manufacturing company with proven technical capacity, manufacturing capability, and extensive industry experience in the supply of electrical cables and conductors (For Lot 1A & 1B ONLY);
10. Valid membership and certification issued by the Cable Manufacturers Association of Nigeria (CAMAN) (For Lot 1A & 1B ONLY);
11. Evidence of valid Nigerian Electricity Management Services Agency (NEMSA) Electric Concrete Pole Manufacturers Certificate. (For Lot 2 ONLY)
12. Evidence of duly established concrete pole Manufacturing Plant based in YOLA, ADAMAWA STATE with proven weekly output production capacity of 250 – 300 Poles ((For Lot 2 ONLY)
13. Statement of eligibility confirming no conflict of interest and compliance with Extant Regulations or Sworn Affidavit
a. disclosing whether or not any officer of the relevant committees of the Yola Electricity Distribution Company Plc or the Bureau of Public Enterprises (BPE) is a former or present director, shareholder or has any pecuniary interest in the bidder and to confirm that all information presented in its bid are true and correct in all particulars;
b. that no Director has been convicted in any country for any criminal offence relating to fraud or financial impropriety or criminal misrepresentation or falsification of facts relating to any matter.
c. that the company/firm is not in receivership, the subject of any form of insolvency or bankruptcy proceedings, or the subject of any form of winding up petition or proceedings.
d. that the company/firm does not have an existing loan or financial liability with a bank, other financial institution, or third party that is classified as doubtful, non-performance, bad, or whose repayment portion has been outstanding for the last four (4) months.

OTHER REQUIREMENTS
1. Evidence of financial capability to execute the project by submission of Reference Letter from a reputable commercial bank in Nigeria, indicating a willingness to provide credit facility for the execution of the project when needed.
2. Verifiable evidence of at least three (3) similar contracts executed in the past five (5) years, with supporting documents (Letters of Award, Valuation Certificates, Completion Certificates, etc.).
3. Proof of annual turnover of N250m and above.
4. Company profiles with details of key personnel including copies of their Academic/Professional qualifications.
5. Company’s signed Health, Safety, and Environment (HSE) policy and equipment.
6. Evidence of accreditation/registration with relevant professional bodies (COREN, NEMSA, NERC, SON, MAN, etc.)
7. Detailed delivery schedule plan.
8. Letter of undertaking that security issues would not be a challenge to work in Yola Electricity Distribution Company Areas of Franchise.

NOTE: All documents must be submitted under a covering letter on official company letterhead, showing RC number, contact address, email, phone number, and names/nationalities of directors. The letter must be signed by an authorised officer of the company.